Chosen Solution
Hey guys, I’ve lost little plastic locking bar from 3rd connector and it doesn’t work… I mean the big speaker and sensors don’t work =( how can i solve this problem? thanks
you could try and replace connector 3 if you have the soldering skills and equipment, it’s not for the faint hearted, you could send it off to be replaced by a professional (which isn’t too costly these days) or you could try a diy fix.. use some double sided adhesive tape and place it near the connector, insert cable 3 and then press onto the tape, then secure over the top of the flex to make good contact with the pins.. you could try more tape or a thin piece of foam etc to apply some pressure (not too much or you risk pressing on the back of the LCD) from the display backing.
Alex, your ribbon is mangled and that connector isnt holding because one of the side legs is missing. You have to desolder it, and solder a new connector on. It will be difficult for you to get a working phone with it in that condition. Im almost sure that ribbon is trashed.
