Chosen Solution
Hello! :) I am working on a iphone 6s. I have an issue when installing the LCD. When i install it and put on the plates the screen still works. But when i click in the screen it stops working. So the screen only works when loose in the frame and not mounted correctly. When i pop off the screen it still does not fire up again I have tried the following pressing the powerbutton and home button at the same time.Disconnecting the battery and reconnecting ( atleast making the LCD work again)Using another original LCD (still not working).Reapplying the connectors for both LCD and batteryTried without plates over both battery and LCD connectorstried without backplate. The LCD will only work when not mounted all the way in the phone, and work without issues untill i install it completly. Does anyone have experienced the same issue or have any idea how to solve it? Update (05/10/2019)
The issue is fixed. The grey/silver notch on the LCD flex cable made contact with the ear piece mounting bracket. I made some spacing between these two and now it is working perfectly! :D
The issue is fixed. The grey/silver notch on the LCD flex cable made contact with the ear piece mounting bracket. I made some spacing between these two and now it is working perfectly! :D
Check for any exposed solder contacts on the back of the screen. These may be hitting a metal bracket and shorting out the back light when closing the device or pressing down on the screen. Cover these contacts.
Fit the screen like normal with the screen lit up and working and then when it goes off shine a light on it from a torch or something or press the home and power button to restart and see if u can faintly see the apple logo… You may have knocked a filter or other ic for backlight that when u add extra pressure on the flex it pushes it out of place. Also check u have the little tape over the solder points for the backlight on the screen and make sure that’s not making contact with the shield or anything else.
