Chosen Solution
I have a kenmore dishwaher model 66513883k800. Most of the lights light up but it will not start. Reading through other forums, I started replacing pieces. I have replaced the door latch, the fuse and now the entire circuit board and still the same thing. It runs through the diagnostic, fills, drains, with no problem, but will not show me any error codes. What else could be the problem?
Well we can close this one out. I replaced the front panel and everything is working now. So I guess the theory is that if it won’t start, with some lights working and some not, and no diagnostic code - then the panel is bad. Regardless, the fuse, control board and door latch are brand new too! Thanks for your help!
Hi, You said that you have new control boards. I am thinking that you have a faulty Control Panel. The fact that the delay lights don’t come on or move when you press the delay switch, the 1-Hr wash switch doesn’t work when you select it when you have either had the new or old “control board” in points to it. There may be a fault in the Control panel which is ‘confusing’ the control board as to what it has to do so it does nothing. Running the diagnostics may have nothing to do with the control panel except to get into the ‘mode’. the control board is pre programmed to perform the functions and as they work there will be no fault code. 2 part answer
