Posts

Chosen Solution I have a mac with no disk (damaged) I’m trying to install macOS on a new drive. The Mac boots and recognises the usb (pressing cmd+r and choosing the usb), but at a third through the first loading bar, before I see get into the utility, it just stops and doesn’t ever get any further. The usb works fine on other Macs and has Yosemite on it. I have tried removing ram sticks, using known good ram and disconnecting the cd drive but to no avail....

Chosen Solution I have this macbook air 2015 with 4 GB of RAM and 256GB of SSD, the device is having a very slow performance. On start up, I tried to open chrome and it opens with blank window and the spinning-loading-thing. Most of the times when I am trying to open Youtube or sites that contain video-based Ads, the macbook suddenly the mac freezes and I have to do the force shut down....

Chosen Solution Whirlpool dishwasher. Five years old. Just started making a growling noise during the wash cycle. Seems to get less noisy as cycle progresses. Has a quiet pack insulation and was very quiet until last couple of days. This is likely due to scaling building up on the rotator thus making it out of balance, as it rotates around it “grabs” and this is what your hearing.

Chosen Solution my 1995 Subaru makes a clunking noise when I turn left or right out of my drive way I have replaced the lt. @ rt. front axles and CV joints thinking that was the problem, but the clunking is still there. CV joints do tend to make a clunking sound when they go out but before you go to the expense of replacing them you should check other things first like the stabler bar links ....

Chosen Solution My ACER will not even open to the windows desktop it’s stuck on PC Performance & Stability analysis report on WINDOWS TOOL and in each corner it says Safe Mode. Its getting frustrating because I cant do anything with it. HELP!! Andrea you are in windows save mode. When you restart your computer do you get the option to start windows normally? When it first starts up in safe mode, can you got to the device manager and check on the systems icon you should see all your installed hardware....

Chosen Solution I have a problem with my screen orientation… it almost seems like the phone thinks it is always upside down, I just did an ultrasonic clean and was wondering if anyone else has seen something like this on a 7 plus. There is a chance I put some screws in the wrong place, or there is a chance the Gyroscope chip is bad. Any guidance is appreciated! The strange part is that the background still does the rotation effect when you tilt the phone....

Chosen Solution I have Iphone 7 i dropped it screen is damaged, and the iphone now doesnt come on nor will it charge or be recognized by computer when plugged in. is there anyway to test to see if there is power getting to battery If you have access to a USB Ammeter, you could use that to determine if the phone is really drawing current when it is supposed to be charging....

Chosen Solution Last night, I replaced the battery and microphone/lightning port on my IPhone 8. The battery had been having issues holding a charge, and people I talked to on it reported hearing static or general trouble understanding me while talking. I didn’t have any significant issues with the removal/replacement, it just took a while to strip it down and build it back up. The battery seems fine and is charging, but the microphone appears to be completely inoperative....

Chosen Solution I was doing my ipod screen repair(cracked) before i finished the repair you had to test it, to see if it turned on, i tested it and it turned white, but it only lasted for a couple of seconds. After that i tried testing it again but this time it wouldnt respond. It just stayed black. I did everything right in the repair. Please help!!!:( Hi Maria, This seems to be a common issue....

Chosen Solution I’m repairing my macbook myself, and I’m wondering if it’s possible to remove/replace trackpad? The screws have me intimidated. Here’s a video on how to do it: https://www.youtube.com/watch?v=tBr_EdoB… and another one, but it includes doing the keyboard: https://www.youtube.com/watch?v=_yfRgs1V… UPDATE Metal Spudger

Chosen Solution My A1076 front bezel’s screws are all broken and I want to replace it, but the part is much harder to find than the iSight model front bezel. Can I use the iSight model front bezel on my A1076? No. These are very different models even though they look the same. You can get into your mach by removing three screws and taking the back off. The iSight models have a front bezel and you get into it by removing the screen....

Chosen Solution ive done numerous touch ic repairs but this is the 1st time im seeing this. yes, i ran the jumper to m1 then insulated it with uv solder mask, and used coins as heat sinks as to not reflow surrounding components. my issue is lines on the screen and cant see apple logo. 1st i tried reballing the meson ic from the phone. when i got the lines i assumed a bad chip and used a new one....

Chosen Solution The truth is Whirlpool is a piece of $@$*! I purchased a house from Del Webb in Richmond TX. The Dishwasher handle came off after 1 month normal use. Called Whirlpool service, service man came and said its cosmetic.. Not covered. We open with a screwdriver. Now it doesn’t get anything clean and won’t dry. Was advised by whirlpool to increase water temp on water heater. Now at 120 F still doesn’t work....

Chosen Solution Hi im working on installing MacBook Pro 15" Unibody 2.53 GHz Mid 2009 LCD guide. I have a question about steps 22-25. Because i have to soften the glass adhesive with the heat gun. When im reassembling my device, i dont know what kind of adhesive do i have to use when im mounting the glass again With a bit of luck you can reuse the old adhesive. Just press the glass on, heat up again and apply gentle pressure....

Chosen Solution I have a hydronic baseboard heat system which 1 zone serves multiple baseboard radiators heaters and it is a long loop. The last 3 heaters are not getting hot enough. I’m a plumber by trade and I bled the system. I’m wondering if there is any solution to get the last 3 radiators on the loop as hot as the first few radiators without having to repipe for a separate zone....

Chosen Solution Hey guys though i’ve already searched for topics involving liquid damages i was not able to find a case that was pretty relevant to mine so i’d like to have some of ur advice on this question : So basically i own a Mid 2009 Model A1278 / 2.26 GHz and my keyboard doesn’t work properly. Seems like 2 upper lines of keys are linked . Like when i type q the result is q1 , w is w2 , e is e3, r is r4 and so going on for the first range of characters… It’s very annoying and this issue came after i’ve by misfortune spilled some glass cleaning liquid on my keyboard when i was cleaning the screen....

Chosen Solution hello. I was wondering if you could direct me on what to check with an iphone 6s that was water damaged and has no short on vcc main or vcc batt. when i hook it to dc power supply and try to power it on, it only draws 40-50 milliamps. voltages are good on vcc main and vcc batt. also when i hook up a battery it charges at like ....

Chosen Solution I restarted my MacBook Pro. It goes to the startup screen and loads to 100% and stops. I have tried all of the possible startup possibilities, but it doesn’t respond to any of the key combinations. It won’t even start in safe mode. It loads, but is completely unresponsive to anything I try to do. The only response I have been able to get is with an SMBC reset (option + control + shift + power button)....

Chosen Solution I had two broken MacBooks. One worked fine, except the display was broken. (tested on external monitor) I just swapped a working display onto the Macbook. After replacing it the Mac is completely dead. Won’t turn on, no Apple ding. Nothing. I unplugged the battery during replacement just to be positive I couldn’t short anything. No possible ideas what could have happened, but this is super depressing. What do you guys think....

Chosen Solution Yes it goes into rinse It would help to have your model number. Here are the top three causes, there are more if these aren’t it. Cause 1 Agitator Repair Kit If the washer won’t agitate, replacing the agitator repair kit may solve the problem. The kit contains the agitator components that are most likely to wear out and/or fail. If any of the parts are worn out, stripped, or damaged, replace the kit....