Chosen Solution LG TV - 55LF6000UB Have blinking LED’s so was in process of replacing the LED strips but discovered a 4 inch burn hole in the reflector sheet and also the plastic light filter has some burn damage. Is this still just a LED strip problem? Can I continue and replace the strips or is this now a fire hazard. Thank you. @beiss5 the burning is over and done with....
Chosen Solution Fan making noise on Legion 5i 2020, assuming fan is clogged. Make good use of Ifixits guides to open up your laptop and clean the fans maybe use a vacuum cleaner, but do be careful about doing that Hi @tonyharrison ifixit probably doesn’t have a guide yet, as the model may be too new. Most guides found on ifixit are posted by users but given how new your model is, it is doubtful that people would have opened it yet, as the warranty may be voided if they did....
Chosen Solution Hi. I have iPhone 6 and the brightness slider slides but it doesen’t do anything. The backlight works but it’s wery low (like its lowest level in normal use). I have tested it with different screens without any luck. It is tropped once. It seems that the Backlight filter FL2024 is slightly burnt. If filter FL2024 is burnt does the backlight work at all or are there something else broken....
Chosen Solution I recently bought a used MacBook Pro “Core 2 Duo” 2.4 15" (Unibody) Late 2008 and have replaced several parts with more coming soon …. One thing I’ve noticed is that when I connect the charger the Battery Indicator LED’s on the ports side light up briefly then go out completely. I’ve never owned a MacBook Pro before with this feature and not sure if they’re suppose to stay on ?...
Chosen Solution MacBook Pro 17 inch screen goes blank 2 minutes after booting up. I replaced the battery and the charger, still no results. I replaced the logic board, still no results. Tested booting up with both Memory sticks and then individually, still no results. Please advise. V/R Stan J. Dominick It might be the inverter board..the age of the Mac points to that and with the logic board already changed I believe there’s not much else to be tried....
Chosen Solution Hi, I replaced the battery with a new battery from ifixit and got a new 85W magsafe adapter from Best Buy. After replacing the battery the laptop would boot fine and would stay charged as long as it was plugged into the wall. The battery is now completely discharged. In order to boot the laptop I have to do the following: Disconnect the power adapterHold the power button for 10 secondsWhile holding the power button reconnect the power adapterContinue to hold the power button for another 10 secondsWhen the power button is released the computer boots and chimes What are the next troubleshooting steps I can take from here?...
Chosen Solution Hi I bought a Macintosh Plus from Canada ( I’m from Ireland) and plugged into my step-down converter then I flicked the switch on the back and I heard a really load pop, so I opened the machine the 2.5A tube fuse was blown ( black sot inside the tube) and the thermistor at R39 had blown in half. I checked over the Analog board and I cant seem to find any thing else damage besides the fuse and thermistor, so I order 10 Ohm 3A Power NTC Thermistors and I received them today (a month later) I have soldered the new thermistor in and the fuse is still blowing and the new thermistor looked to be slightly damaged at the tip of the leg....
Chosen Solution I bought this phone second hand and realized that the microphone will work if its not on the earspeaker mode in a phone call, but if i put loudspeaker on the mic stops working and no one can hear me? If i order a new charging port and replace that is that my best bet to fixing this? I have heard there is two seperate mics located on the charging port and i assume one is for on loud speaker and one for regular ear speaker is this correct?...
Chosen Solution I have a razr v3 from 2004 whenever I Try fo boot it up I get a weird message is there any way I can fix this. Here is the message Boot loader 08.26 SW VERSION R374_G_0E.41.C3R_B OK to program usb transfer mode phone code SIG 35:02: I found a rom for it online. It’s not a rogers rom but it will do. I flashed it and it works (kinda....
Chosen Solution (UPDATE: i can plug it into itunes, so i guess its not that bad? STILL LOOKING FOR SOLUTIONS!!!) i dropped my ipod yesterday, wasnt a far drop either. it was from my lap to floor and my headphones almost saved it. i went to plug it in last night and it wouldn’t charge with a normal cord, only a dock (iHome). i have no clue on how to repair ipods so should i just save up for a new one?...
Chosen Solution Hi i have a iphone 7 that was water damaged and i cleand it and it worked again but the home button and the touch id wasn’t working with time the home button started working again just fine but still touch id isn’t working and not enrolling fingerprints and when i try to enrolle a fingerprint and press the home button the taptic engine works like crazy Hi, there is a very large possibility that the home button is water damaged....
Chosen Solution Hello, iPhone 8 working completely as normal except the rear camera and flash. Also torch function not working. Selfie camera works fine. iTunes restore no progress. I can get a new camera and flash module so wondering if anyone had any thoughts? I believe it was dropped in water as I can see yellow stains on the bottom part of the screen…! If it was dropped in water, then you need to carefully inspect and decontaminate it if water did indeed get inside the housing....
Chosen Solution My iPhone 6 plus will not be recognized as a device in my PC. I cannot sync to anything to add music or any kind of iTunes media that isn’t instantly downloaded to my iPhone. My phone will charge but my PC won’t give a prompt saying a device is plugged in. This is not an issue with drivers because I have troubleshooted already and I have tried a different cord and even a different PC....
Chosen Solution Can someone help me? I have a 7 year old iMac 27". I’ve used it regularly, but now it’s the second time it died on me. Last time it was the hard disk. That costed aroud 450 Euros. Now it’s either that again! Or it’s the logic board. Bloody he.. its annoying! Although it 7 years old I still think its ridiculous that it can’t be fixed as they don’t sell the original logic board in Europe any more?...
Chosen Solution Is macbook charger (45 watt) repairable? My macbook air mid 2013 stopped charging, I tried everything i found on google but failed and eventually i had to open the charger to see inside. And I found out that one of the capacitor is blown out. Is it replaceable? If yes where can I find it. Sorry the chargers are not repairable. Make sure you get a REAL unit as there are a lot of knockoffs out there now!...
Chosen Solution How can I activate my second hand device Is it asking for Apple ID account and password? If yes you can’t. The only way to get it unlocked is by contacting the original owner. Jay, From forums I have read, if you are trying to activate an iPhone and it is asking for a previous owners Apple ID and password, you have encountered the activation lock. A security feature that prevents thieves from using a stolen or lost iPhone....
Chosen Solution Hi Everyone, i have my mother iphone 6. Unfortunally she forget his apple id and cant use. We buy used phone , so i can ask help to apple. I try to change to Rewritre Serial N. with JC PRO 1000S, the phone resotre perfectly but have this error in the end “iPhone not activated because activation information could not be obtained” I do in this step : 1 ) change nand and ONLY rewitre an old broken iphone serial number....
Chosen Solution Hello all, OK so, I replaced my PS4 HDD from 500GB to 2TB all good, today I bought a second hand PS3 and wanted to replace the 160GB HDD that it came with, so since I am not using my old PS4 HDD I wanted to add that into the PS3, so I replaced the 160GB from the PS3 with the 500GB PS4 one and all good. I then downloaded the PS3 firmware and added it in correct folder order, however when I turn on the PS3 with the firmware USB inserted I get the: “Cannot Start....
Chosen Solution Hey I have got a problem. I was using my MacBook Pro Retina 13” Early 2015 as usually and then I closed the lid and connected the charger. When the notebook was charged, I opened it and it was a window to enter the password. The keyboard stopped working (except power on/off button), but the trackpad works great. I tried to connect external usb keyboard (window’s one) and do SMC and PRAM reset, but I think it doesn’t work with that keyboard....
Chosen Solution Is the Kingston HyperX Impact 16GB 2X8GB Kits DDR3-2133MHZ DDR3L CL11 SODIMM 1.35V Dual Channel Memory compatible with Macbook Pro (mid 2012) Non-Retina? Probably not, too fast. That RAM is for a System Specific Memory for Apple Select Product Line 27" (Late 2013) Core i5/i7 Here is what you need: http://www.kingston.com/us/memory/search… RAM Type: PC3-12800 DDR3L Min. RAM Speed: 1600 MHz Details: Supports 1600 MHz PC3-12800 DDR3L SDRAM SO-DIMMs (204-pin)....
