Chosen Solution My video cuts out after a period of use - no backlight or picture. The interesting part is that the longer I leave it turned off, the longer it will have video the next time I try to use it. I’m going to replace the thermal paste in case it’s an overheating issue but if that doesn’t work I’m assuming it’s going to be a deeper, component level problem....
Chosen Solution The indicator light will also go on for a split second, and seems to show that the motherboard responds to the different startup combinations (I’ve tried them all). It still charges the battery. Previously I had issues with overheating, so I used SMC fancontrol to run fans at full speed most of the time. Then, for a while it would run fans at full speed during boot but never get past a black screen....
Chosen Solution Hello, So I got this iPhone SE a while ago and it ran into some issues. The iPhone randomly turned black and weird lines appeared on the screen and it reboot, after showing the Apple logo, t would get all messy and reboot again. It would do that a few times then boot up again. This happened quite often. After a while, the iPhone was working fine and out of mowhere it shut off and it stayed that way....
Chosen Solution After a “successful” replacement of the cracked back housing on my iPhone 3G, it won’t start up. Here are the symptoms: when not plugged into any power source it’s just a black screen, neither of buttons combination (wake, wake+home, 10sec-60sec…) don’t work, it stays black when connected to the wall charger, after pressing the wake button, the silver apple shows up for exactly 15 seconds and the screen goes black; again no other combination of buttons have showed any result when connected to the USB on a laptop: pushing the wake button the screen just blinks and goes dead with the LCD’s pixels “melting down”, as if it was forced to shut down....
Chosen Solution Hello, I have an iPhone XR that is stuck in a boot loop. It happened after attempting to back-up the phone using iTunes (the phone’s memory is full), and I got a message that said that there was an error during the backup. I unplugged the phone and all the apps were stuck and wouldn’t open, so I tried restarting the phone. It has been stuck in a boot loop since, when it turns on I just see an Apple logo, and sometimes it blinks....
Chosen Solution Hello, Yesterday i replaced the battery of my iPod with a replacement battery. After installing the battery i had to calibrate the battery, so i let my iPod charge for 5/6 hours, after unplugging my iPod the battery icon was still red. I tried charging my iPod with a usb iPod charger and a iPhone charger. Can someone help me fix this issue? @scharre this model is a bit complicated at times (seems to vary from model to model on the 4th gen)....
Chosen Solution Is the WDS500G2B0A backward compatible to 3.0 GB/s SATA II? If not what 2.5” SSD drives are backward compatible? What are you recommending? @danj @mayer - As far as I know none of the current WD drives offer SATA II support (2.5” or 3.5”). Samsung is the only SSD that states SATA II support as far as I know Samsung 860 EVO For HDD’s at this time only the Seagate 3....
Chosen Solution Hi, I have a water damaged iphone 6. It was not working at first, I put it into isopropyl alcohol, and it is turning on now, logo is coming to screen and when I release the power button screen is going black, but the light is still on. If I push the button for a long time, screen is not going black, logo is always on screen and then phone is turning off....
Chosen Solution Is this RAM compatible and/or is there any reason I should not buy it? It’s probably suitable, code includes a 1066 which is most probably the speed in Mhz. However, I agree with @a_i_takeover ..why bother buying from a source that hides infos on what they’re selling when you can buy a suitable upgrade from a more clear and reliable source ? —————— It seems site isn’t holding back any info, after you included the link with description that it’s clear....
Chosen Solution Hi. My daughters favorite toy’s the laugh and learn smart stages puppy sis and the heart isn’t working. The ears, hands and feet’s working but not the heart. Contacted the brand and they won’t fix it. I opened the doll and saw that the wires connecting to the heart are cut. Don’t know how to fix it. Can anyone help please? You could strip the wires and re-solder them on the buttons connectors...
Chosen Solution Can some kind soul give us advice on how to cover the join on the washing machine drum which feels sharp and believe to be putting holes in my clothes? Thank you Update (07/27/2019) Update (07/28/2019) I agree, strongly believe it is a manufacturing issue. I spoke with Hotpoint support and advised to sign up to the Repair & Care to have an engineer come by. Surely it is flaw with the drum as the join should not have lifted like that to create a shaving razor like effect....
Chosen Solution Hello! My mid-2012 MacBook Pro (running Mojave) all of a sudden started lagging and getting the dreaded beach-ball after every click. This just freezes up my laptop for about 15-30 seconds before the click is registered. I was working on a web page, closed my laptop, and when I came back a half hour later everything was slow as soon as my laptop woke up. I’ve replaced my hard drive with a Samsung EVO SSD and it has been running beautifully for 6 months, but this started out of nowhere....
Chosen Solution Hi Team, Just getting started on replacing the LVDS cable on my MBP Late 2008 Unibody to correct what is probably a loose or wonky cable, and had a quick question for those who have had to do the “heat-gun” disassembly of the 15" MBP Unibody’s glossy screen. I have all the parts ready, and the heat gun is ready to go, but will I need some adhesive or something to reattach the LCD display’s glass front to the main display assembly when I put it all back together?...
Chosen Solution Whats the problem what do I need to Hi, Check around the radiator, radiator cap, coolant reservoir and the radiator hose connection(s) at both ends and also the engine block for stains the colour of your coolant. Also for splits/cracks in the radiator hoses. Check for signs of water in your oil. Look at the dipstick and see if there are signs of water mixed with the oil. If there are no signs, get your radiator pressure tested in case there are splits in the radiator core and it only leaks under pressure....
Chosen Solution how can I have video card replacement on mac mimi? the video card is built on the logic board. If you are looking to upgrade, it would be best to locate a newer mac mini instead of attempting to upgrade yours as the logic board of newer mac minis are not compatible with the rest of your components.
Chosen Solution Hi Everyone, I am using MacBook Air Early 2015. It was working properly yesterday but today in morning, keyboard stopped working on a startup. It gets started in safe mode. Please suggest me any alternative solution. Many thanks, Vikita Unplug the battery, unplug the keyboard cable (which connects into trackpad) and plug in the charger with the battery and keyboard disconnected. If it doesn’t boot into safe mode, order a keyboard and plug it in to test it (the shift key is probably activating by itself, starting it in safe mode)....
Chosen Solution Hi, I just finished replacing the battery and screen of an iPhone 5C which is actually quite basic procedure for me. At first everything seemed fine, it powered up normally using the power button and the home button works fine as well. BUT as soon as you´d power it down, be it manually or whatever else, it NEEDS to get the battery unplugged and plugged back in, otherwise it simply won´t turn on again....
Chosen Solution My iPhone SE has gone completely dead. The display is unresponsive, my computer registers nothing when it’s plugged in, and DFU mode didn’t help. This happened during a battery replacement, where the phone began to boot before I was ready to put the screen back on. I turned it off, finished screwing everything in, put the display on, and found the phone unresponsive. The battery had charge, and the screen was working....
Chosen Solution When I put my iPhone in dfu mode, connect it to iTunes and start the restore process. It reboot it’s self download directly the official firmware http://www.iclarified.com/750/where-to-d… Remember where you saved this. Put phone after you finished downloading into DFU mode, open iTunes, and i will ask you to restore. On PC Hold SHIFT+ Click the restore button. On MAC, Hold OPTION + Click the Restore button. Itunes will now let you choose an IPSW file....
Chosen Solution Replaced a Logicboard and FaceID on an iPhone 11 with a new Logicboard from Aliexpress with FaceID 64GB. Turned it on, everything worked, camera, faceid, speakers, charging. After a few minutes of setup it suddenly died, didnt respond to resets, just a black screen, seemes bricked. Battery charged to almost 4V, now when plugged in it draws ~50mA at the charger, when pressing the reset combination it dropps down to 0mA for half a second....
