Posts

Chosen Solution Nissian told me there is not a fuel injector valve for my 2005 nissian altima 2.5s 4cylinder If Nissan said there isn’t one, then generally there isn’t one. It could be that you might be referring to a cold start pump or cold start injector. Which has nothing to do with the fuel injection system. A cold start injection system, just pushes air in the combustion chamber after combustion to aid post combustion ‘burn’ and allow for lower emissions....

Chosen Solution The film will not release when I pull up the wind lever. I have tried gently prying it open at the same time as lifting the wind lever but that doesn’t work. I want to try and use a paper clip down the wind shaft to release it but the wind lever is in the way and I don’t know how to get the pin out. Can I just push the pin down the shaft?...

Chosen Solution I have a Kitchen Aid wafflemaker KPWB100O-B00 with afailed power supply pcb with a burned resistor and can not find the Ohm value of the resistor as the heat damaged the colours. Can not by a new pcb, I have tried but it is to old. Attached is a picture of the pcb with the resistor named R3. It failed when I connected a 220V to 110V converter, the converter was for ”non heating, non electronic use only”....

Chosen Solution So yesterday I successfully upgrade ram and added 250 gb blade type ssd. It powered on last night. This morning it won’t turn on. I looked at all my pictures before I started and it appears the power supply board had previous damage already. No led indicator turned on at all this morning when plugged in and when pressing power button. my question is, is the repairable or should I just buy a new board?...

Chosen Solution Yesterday the shift stop to work most of the time (works 1/100) suddenly (did not spill anything) And weird thing that today the Control Option keys joined the party and they stop working (only left keys) It’s a MacBook Pro “Core i7” 2.2 15" Mid-2015 (IG) (MJLQ2LL/A). I have tried the keys in my Windows VMWare and they don’t work. In keyboard viewer in Mac they are not highlighted when tapped....

Chosen Solution I recently stumbled upon an iPhone 12 Pro Max with an broken LiDAR sensor. The “measure’’ app instantly freezes, and no 3D scanning app detects input from the sensor. All other components in the phone work great and all camera’s work in their normal modes. There also isn’t any excessive power drain or heat generation like sometimes happens with shorts. It also boots normally. I did order a replacement LiDAR sensor, but it will take a while for it to arrive....

Chosen Solution How to locate pcv valve 2.8 l v6 James Griffin the PCV valve should be in the rear valve cover. There is a hose going from the intake plenum to the rear valve cover. Pull the hose off and that is where the PCV valve is.

Chosen Solution My Nokia Lumia 520 drained out its battery, stayed some 6 weeks without functioning , now when I try to charge it , it wont show even a charging sign or start even if I try a soft reset , it just doenst respond to anything, its blank and quiet, anyone to help please carole, start with a new battery. It is possible that your battery is discharged below the threshold for it to be recharged....

Chosen Solution A friend of mine was trying to fix a Mac tower for a small business, and determined that the PRAM needed to be replaced. After replacing it, the original problem was resolved, but the icons were scrambled, some settings were lost, and now it doesn’t seem to see all the drives on the network. If have fixed most of the issues, but the ones that remain all have the network in common....

Chosen Solution Hi all, My Mac is not reading an SD card from a digital camera. The card appears on neither the desktop nor in finder. The card works fine in my camera. Any ideas on how to fix this? Thanks in advance! I restarted the computer and the card is now read… guess I probably should have started with this :/ Make sure the contacts on the SD card are clean, use a CLEAN pencil eraser and lightly rub the gold contacts....

Chosen Solution Hello, I’m working on a logic board of the A1466 (EMC 2925) and I’d like to know the exact position of the lid sensor. Since the screen has been completely ripped off (lol) before I got it, I can’t seem to force it to boot to an external monitor. (The solution would have been to close the lid, simply). The logic board has been isolated from the rest, to the bare minimum, and the fan is spinning....

Chosen Solution I’ve a MacBook air 2012 which got some water spilled over it. Replaced the keyboard and booted without problems, except I noticed this weird marks on the lower part of the screen, just above the bezel. It is most visible on a white background, when logged in for example with the dock present it becomes a lot less visible. Quick google search and the stage light issue pops up, however in those problems the spots are distributed at regular intervals along the screen which is not the case here....

Chosen Solution I received a Macbook 2.1GHz, model A1181, from a friend who couldn’t get it to work, and I hoped I’d be able to do something with it. Well, it won’t power on at all. The battery was bulging out to the point that it no longer fit into the computer. When I put a known working Magsafe charger into it, it won’t even light up. I’ve taken it apart and don’t see any apparent damage....

Chosen Solution If you’re concerned about compatibility, the best way to correct it is replace the existing modules with a factory matched pair from a reputable vendor that meets what you needs. It’s not worth the effort to try and match up a module you’ll probably never find again since it probably came from a Chinese factory who sold them to the highest bidder willing to print a name on it....

Chosen Solution Hello, I have changed the microphone / charging port on my S6 Edge. Now the microphone is very fuzzy and people can barely hear me when i’m talking over the phone. Everything else is working fine. The repair went smoothly as I’ve fixed quite a few of these before. Has anyone else had this problem? I’m guessing it could be different rev. numbers on the part. Although I binned the old one and cant find out which version it was....

Chosen Solution L300/07U had it upgraded from vista to windows 7 now microphone not working. On Skype I can see and hear them they can see me but no sound maybe no driver? Double-click the speaker icon in the system under “Options” - “Properties” activate the microphone display. You may also make sure that the correct recording device is selected in the listbox. Hey guys. Toshiba Satellite X205-9800 user here. I updated first to Windows 7 Home Premium from Vista and loss use of both my webcam and my mic....

Chosen Solution I want to know if I change mother board, it is possible for me to get my data back…. As i dont have any kind of backup… tushar, no. A new mother board will not get your data back. The data is stored in IC’s on the motherboard.

Chosen Solution So I replace a screen on an iPhone 7 Plus for a friend. After doing so the message that the iPhone has been disabled and I undertand that it must be plugged I to iTunes to be able to use again. Here’s the tricky part that I am not sure of. Just prior to me replacing the screen, she had bought it from another friend that was not using it due to the damage and had bought a new one....

Chosen Solution I just pulled out my old iPhone 5 from its box to see in my horror to be disabled for 24 million minutes (4 decades) and its stuck in airplane mode. I tried methods with putting a working sim in there in rebooting 2 times to no avail. I also heard about restoring it but I don’t want to lose all my info on it so can anyone help?...

Chosen Solution Hi, After going to a store to get my iPhone SE screen replaced my iphone does not boot up (stuck in boot loop) and cannot even hold a charge meaning it will not even power on if not connected to with the power cable. I have tried: getting a new screen replacement but the problem persists;disconnecting the battery and with the cable connected (does the same)resetting through itunes, it will reset and update but will still be stuck in the boot loop...