Chosen Solution Will the logicboard from a G4 1.42 work inside a G4 1.33 machine? Help appreciated Sorry but no. The 1.42 has different connectors on the logic board so you wont be able to connect your 1.33 airport card, hard drive, trackpad, inverter cable and the reed switch module is also different. Try to find a good working 1.33 logic board instead.
Chosen Solution Hi All, I bought this SSD reader was told it would work for the hard drive in my macbook but it doesnt work the card does fit in but wont pick up on my laptop - Orico USB 3.0 2.5" External Hard Drive Tool Free 2.5 inch Enclosure What else is there you can use, the laptop had water damage and finally died on me but i have holiday photos I wanna get off the Hard drive....
Chosen Solution A Macbook Pro 13” came today to my work shop because 5 keys wasn´t working, I take off the keyboard ribbon and noticed that the contacts were very uggly, I clean it a little with alcohol and then put it back. Now the only key working is the power key. Do the owner needs a new keyboard or there is something I could try??? We are in Cuba, and it is very hard to get spare parts here....
Chosen Solution When booting up, my older macBook Pro 17" will get as far as the gray Apple logo on the screen then go to a white screen and hang. I can restart in safe mode and the replacement hard drive is only a year old. My CD drive will not allow me to use a disk to re-install, it just reads it then spits it out. Is this a logic board problem?...
Chosen Solution My tractor won’t stay running without easy start, it ran low on fuel have tried to get air out but still won’t run, it will turn over but that’s it, can anyone help me please. @holly1catherine ,Catherine, Ensure battery is fully charged. Trouble bleeding air out, just barely crack open each fuel line (one at a time) right at the injector while someone cranks the engine over. As soon as you get fuel coming out tighten it back up again....
Chosen Solution Hi all, newby here! I am a R&D engineer in photoprinting and have good basic electronics understanding and skills, however, I am not able to complete this next task. So If any willing to help out and I can send to then GREAT! My elderly mum has a 3GS, and had it second hand with no issues until yesterday when it slipped from her lap onto a carpeted floor!...
Chosen Solution Hi there! So i have the following problem. I just finished an iPhone 7 Plus. Replaced it with an OEM screen, also had to replace the front cam flex because of the famous ’ no speaker’ problem. (Before the repair i made sure the battery was disconnected!) Phone had no waterdamage, just the usual screencrack. After replacement everything is working fine (touch id, speaker, front cam and screen) But somehow when i enter the phone and open Facebook for instance, it shuts down and i have to restart it....
Chosen Solution HI any one have good idea how to remove iphone 8/ 8plus back glass we are looking for tool which help in to remove back glass thanks I don’t offer IP8 back glass replacement services but I have seen this new tool being being shown on some websites: https://www.unionrepair.com/tbk-238-auto… There’s a video in the link so you’ll get a better idea of how it works. Hopefully someone who does this on a regular basis can chime in....
Chosen Solution iphone 8 rear camera is having issues. when i select the camera icon, the image is wavy (think image on the surface of a flag fluttering in the breeze). also hear a rapid clicking sound while this is happening (turn off the camera, no sound). i’m thinking this might have something to do with auto-focus or image-stabilization features, but that’s just a SWAG. if it is related to auto-focus, where is the auto-focusing sensor located?...
Chosen Solution When plugged into outlet, will show the plug into iTunes screen. The second I unplug it, it dies. Battery doesn’t seem to hold a charge (I just put in a new one). When plugged into a computer (both MacBook and iMac), phone will not turn on, cannot get to the iTunes plug in screen or Apple logo. I can put it into DFU mode but then gets stuck on “Waiting for iPhone” status in iTunes....
Chosen Solution I replaced a hard drive and migrated over all of my photos. Now the performance and speed of iPhoto is slow. Lately, the computer will not accept pictures off the camera at all. How can I fix this? If you hold down command + option then launch iPhoto. I’d check off all the boxes and see if it can repair it self. It will take some time but I’ve seen good results....
Chosen Solution My elephone p6000’s USB port has been damaged to the point that has felt from the motherboard that it used to belong to. I have seen some sites that sell a USB port for this specific model, but I am wondering if it is possible to replace it for a new one for a regular user and, if so, which procedure should I follow, since AFAIK there’s only a teardown guide explaining how to disassemble Elephone p6000, but does not mention anything specifically about USB port, other than it belongs to a secondary board (visit step 3: Elephone P6000 pro Teardown )....
Chosen Solution I can use my phone while charging but as you as I disconnect the charger my phone starts getting retarded and remains on boot mode showing Samsung logo again and again what to do. Idk if its the motherboard or the logic board but it heats up as well. Hi, If it works OK when on the charger but not when only the battery, I suggest that you replace the battery and check what happens....
Chosen Solution I have a Kenmore top loading washing machine; model number 26002010. The other day my wife started the machine and then quickly realized she needed to add more clothes and opened the lid prior to the second unlock/relock cycle. Ever since the washer will start flashing a lid lock error and it will make a strange sound and emit an electrical or plastic like smell. Once in a while I am able to get the washer working by unplugging and re-plugging the washer back it or letting the load machine start empty or by wiggling the lock mechanism....
Chosen Solution New unit, but will not make ice. Or fill with water. Here’s the first thing to look at: Water Inlet Valve How it Works: If the refrigerator ice maker is not working the water inlet valve might be defective. The water inlet valve is an electro-mechanical valve. The coil can show good for continuity and still not let the water thru. UPDATE Ice Maker Assembly How it Works: If the ice maker is not working it could be that the ice maker assembly itself is defective....
Chosen Solution Hi all, since two weeks I have a kernel panic on my iPhone 5. The iPhone isn’t (& was never) jailbroken. At first I installed a new software version (iOS 8.4). Didn’t work out. Secondly, I put my iPhone back in DFU mode. But I have still the same problems: I can’t make a back-up copy because iPhone starts new every time. And I also can’t restore my iPhone after I put it back in DFU....
Chosen Solution Hey, So I last week I turned 18 and got my stepdads Macbook pro 15 late 2011. He never really used it so its in great condition except the battery life. Anyway I noticed that the backlight doesn’t work sadly. I tried resetting SMC and NVRAM with no luck at all. I tried Full hardware test and no problems found and aswell I tried the setting low light feature under settings with no luck either....
Chosen Solution Hi, after removing and reinstalling the LCD display, the right part of about 3" is completely black! Another vertical block is more to the middle: To find the fault, I used Airplay to an external screen, no fault! So I guess the graphic chip is O.K! Screenshots are also O.K. I had replaced the LVDS cable without success! Does anybody have an idea or similar experience? Could that also be a backlight problem?...
Chosen Solution After following the instructions to replace my hard drive (iMac Intel 20" EMC 2105 and 2118 Hard Drive Replacement), right after I finished the repair and started using my iMac again, the screen brightness is more dim (even when adjusted to full brightness) than before. Could it be that I didn’t attach any of the connectors properly? Or any other advice someone could give? I have already reset the SMC and PRAM, which didn’t have any effect....
Chosen Solution anyone know where I can get a replacement zif connector for the lcd screen i broke the little plastic bar on mine, so now the cable is not clamped in properly and the screen does not work.. The device is different but you may find the “Most Helpful Answer” on this previous Answers post to be, well, helpful: ZIF connector is broken, is there a way to replace it?...
