Chosen Solution My iPod 5G Video 60GB was soaked in a cup of water, I don’t know how long, between 1 hour to 2 hours. I dried it with a towel, shook the water out, and blow-dried it on low “cool”. Quickly blow-dried the seams, the usb connect & the headphone jack. While the shaking the screen light flickered on and off about 3 times. Does my iPod & Music Library stand a chance of being saved?...
Chosen Solution I’ve got a mac-book pro 15" model:A1260 (not the uni-body) for about 3 years now, I was restarting it and it stuck in the shutting down page for some minutes I got bored and used the power button and hold it to force the shutting down, when I tried to start it again it didn’t work, the fans start working and I guess the hard and DVD-ROM too and suddenly a noise and all is down, I have checked booting without ram and it makes the error sound I have open the upper case to see if there is anything wrong to see, and removed the main connectors and replaced them again, but I couldn’t solve it, I really appreciate any hints on the problem....
Chosen Solution When pressing the power button. The timer light on the TV turns on then off. You can hear the TV powering up. The lamp is lite in back, but no picture. The lamp then turns off and the standby/temp light and lamp light blink simultaneously. We tried to reset the lamp timer, no changes. Any help would be appreciated. Thank you. Samsung HL-T5075S @union422 “the standby/temp light and lamp light blink simultaneously....
Chosen Solution Kenmore 80 series washer here. Basically just stops at the end of the spin cycle. It can’t slow down, so it just bangs around (very loudly) until it slows down. Washes clothes. Spin cycle removes water fine. Gets up to right speed no problem. Agitator works fine. Can’t slow down properly when spin cycle completes. Or any time it needs to slow down to a stop. Happens during rinse cycle and spin cycle when it tries to slow down to stop....
Chosen Solution The LCD image screen on my Canon A620 has quit working. I am unable to set the functions or use the menu. Is there a fix for this? I had the screen disassembled and there appeared to be a small battery on the PCB however I can not find any information on this at all! Connie Eisenhour, the battery is a 3V lithium-ion battery, Canon part number WK1-5132-000 (MS614FS micro battery)....
Chosen Solution Hi guys, It’s been a while my MacBook’s screen was flickering but I could fix if by change the position of the screen. From 2 days it’s now impossible, my screen is always flickering unless I hold it with une hand ans pinch it (which is not convenient aha) I read threads about display câble or inverter cable but I’d like your expertise. As you can see on the pictures the screen is ok if I pinch it or press the hinge....
Chosen Solution just done a battery replacement and I kind of messed up the alignment of the battery adhesive tabs is it okay to leave it like this? The battery connector is just slightly bending to connect? thanks. I did this same repair on my dads old iPhone 6 and I did exactly what you did and it worked for me. It should work.
Chosen Solution I have a lenovo yoga tab 2 pro, with cracked screen, im looking for instructions on how to replace the screen too. Mine is model Number B8080-F CE0700, any help would be appreciated Hi Here is a link to the service manual for your tablet. It details the pre requisites and then the procedure for removing the LCD display. https://www.manualslib.com/manual/950790…, scroll to p.44 (it is actually p.40 in the document but shows as p....
Chosen Solution My LG G3 is stuck on Life’s Good Logo after it has been immersed in water and after some tries in alcohol and brushing the board! what IC is responsible for the booting (continuing) ? so i can check its circuit?! and what other issues that help? thanks in advance oh man i am sorry that this has happened to you. there are alot of things that could be wrong once you have water damage....
Chosen Solution Ok. I’ve read all the posts about the Power Supply and the LED tests etc. My problems have been unique and intermittent About a month ago, my iMac was in SLEEP mode. I went to wake it up with a keystroke or mouse move (not sure which) and it simply turned off. No shutdown, the light and power went “out.” Dead. I went to power it up and it had no response....
Chosen Solution I was wondering where I can get replacement body trim for the top right rear . there is a usb connection there Had no luck trying to find replacement trim parts. I did find a Genuine OEM Original iRobot Roomba 960 Vacuum TOP COVER CASE REPLACEMENT PART $22.91 + $6.70 shipping https://www.ebay.com/itm/Genuine-OEM-Ori…
Chosen Solution Hello All, A client has asked me to replace the battery in their MacBook Air (Retina, 13-inch, 2018), i have looked for a battery on here and there are 4 different types. How do i determine which one i need, do i need to go and take it apart to find out. I used the serial number on the apple warranty check site and the detail in the thread title are all it gives me....
Chosen Solution Hello everyone, I have a Macbook Pro - 13inch Retina- that keeps restarting when I pull the cord. Few things to mention: The battery is not dead. It runs perfectly fine for long periods when unplugged.I have reset the SMC multiple times with the help of Apple support on phone.I have erased the Mac clean and installed a fresh OS. Thereby eliminating any software issue or kernel panic (I hope)I have the set the system into “Safe Mode”, “Recovery Mode”, “Diagnostic Mode"and every time I remove the power....
Chosen Solution I inherited an old MacBook unibody A1342. Tried several MagSafe power adaptors, and I get the same response from all: Nothing. These power adaptors work with other MacBooks, just not this one. I replaced the MagSafe DC-in board, and had no improvement. Took the battery out, thinking this might be the problem. Still nothing. The light on the MagSafe adaptor never goes on, and the computer won’t boot (or charge the battery) because it’s not getting power....
Chosen Solution Hi, spilled wine on my MBA A1370. After thoroughly drying everything, swabbing everything with rubbing alcohol, and waiting 72 hours, it won’t turn on (maybe I should wait longer?). I tried turning it on without the battery and it doesn’t start. But interestingly, the LED on the power cord lights up when the battery is not plugged in, but the cord doesn’t light up when the batter is plugged in....
Chosen Solution needed a help liarliar, if your touch does not work on certain areas of your screen, it sounds like a bad digitizer. You may have to replace it to repair the full function.
Chosen Solution It stopped working after an update from windows 10. Hi, Here is a link to the latest version Asus drivers for Win10. Find the Audio drivers appropriate to your laptop’s audio controller, (Realtek, Conexant or Via), download and install. Read the Notes near the top of the page as to how to install the drivers. http://ivanrf.com/en/latest-asus-drivers… Do not be tempted to install drivers for other hardware in your laptop at this stage....
Chosen Solution I need to replace my motherboard in my system What is the best way to find the right motherboard? I can’t read the model number as it’s not visible anymore. Is there another way to find the right part? Look on the logic board on the plate right above the RAM slots. Your serial number is there. Plug it in here to find out exact what your machine is, then we can look up the part number: http://www....
Chosen Solution my acer iconia A1810 is not coming on or charging, could it be the battery. the internet said the battery is AC13f3L, the one i have is a AC13F8L which one do i order. My AC13F8L isn’t charging or coming on could it be i need a new battery. the internet stated the battery is a AC13F3L my battery said its a AC13F8L which one is it.
Chosen Solution I replaced the screen couple days ago. I tested the new screen before closing the phone and putting the last 2 screws, the screen worked perfectly, the 3d touch and the camera, all was fine. As soon as I closed it, the phone started turning on and off constantly. I notice is the exact moment when the earpiece makes contact with the screen. If somebody found an answer to this issue will help me a lot....
