Chosen Solution also why does it not empty after washing clothes all the way. the drum is empty but you can hear the water inside the machine. and after a while it stinks. and we use tablets and that sometimes don’t work. are they made to hold water? Billy, here are the specs Dimensions: Weight (lbs.): 245 Height to Top of Cabinet: 38 Width (in.): 27 Depth with Door Closed (in....
Chosen Solution I am trying to restore iphone but every time i press the button on itunes a windows pops up in nearly 65-75% (error 1). After doing some research i found that may the baseband causes the problem. So my question is. Is there anyway to restore iphone without updating the baseband? I fixed it by heating up baseband (under the sim tray) with a hairdryer.
Chosen Solution My Kenmore 300 Series Gas Dryer won’t heat up, or turn off. The timer counts down and it spins, but once it gets to the end of its cycle… it just keeps spinning. At no point through that process does the dryer get hot. After doing a little research, with both issues; i thought it was the timer. I purchased a brand new factory timer and installed it, but the same issues persist....
Chosen Solution Hi. I ordered a drain pump for my washer from some place on Ebay. When I connected it and started a cycle, the machine filled with water, but then that water drained rt through the machine. it wont hold the water to wash my clothes. I wonder if its not the rt drain pump, or I need to do something….please help! Drain Pump If the washer is leaking water the drain pump might have a hole or crack....
Chosen Solution well, when I put the camera in my little waterproof case, somehow it fell in the water.I mean it still works, but looks like a frozen screen, can you tell me in the comets?! Here’s the trouble shooting guide on it: VTech Kidizoom Action Cam Troubleshooting Are you telling me this thing is not kid proof?
Chosen Solution When large mug button is activated, only a small amount of water is released. @dasein I’d start looking for common obstruction in the water flow. This seems to be an issue with the Keurig Single Serve Coffeemaker Brewing System. After a while it appears as if scale build-up or other contaminants prevent the Keurig from brewing full 12oz. It takes longer to brew, the Keurig becomes louder and it dispense on the average 4oz or less....
Chosen Solution I have a TV LG 60PZ950 (march 2011) The color started given out but now hardly any image is visible but the sound is ok. How can I fix it? or what part to change? this is the image we see the board pictures Cindy, thank you for the pictures. Yes as previously suggested this could be caused by the Z-sus Board. I attached an image of where to check and what to check for....
Chosen Solution I need to check the fuel pump on my 1997 cadillac deville. I need to cut an access door and need to know where to cut it. I need the location of the fuel pump? Do you know what you want to do when you check the pump . Most checks are done from your fuse or relay. If your looking for power at the pump then you can do a test of the wiring heading into the pump....
Chosen Solution Hi Iv got a MacBook Pro in, with a 820-00138-a board and I’m trying to find the 8850 Lcd backlight driver. Can’t seem to get any boardview etc for this model. Where is this ic as can’t seem to find it under the scope, is it on the top or bottom of the board ?. There is not an LP8550 on this board, instead it uses LP8548 (U7701) on the top of the board, near the backlight fuse and keyboard connector, not a BGA chip....
Chosen Solution The MacBook wasn’t charging and then stopped turning on. Replaced logicboard and MagSafe adapter and it didn’t work. Still won’t turn on, or charge. Does anyone have any other options to try? If your new logic board isn’t working either, we face two scenaries, first is that you received a faulty replacement but that sounds a bit unlikely. The second is that you’re connecting one ore more faulty/shorted parts to your Mac that prevent startup....
Chosen Solution So, this has been happening for awhile. I have windows 10 and everytime my computer goes to sleep, or nearly everytime, it wakes up and the mouse doesn’t work. To get it back I usually repair the ATK package… sometimes it works, usually… other times I have to remove and reinstall it. That usually works, sometimes not…. I’m tired of it. I’d like to get down to the bottom of why this is happening and fix it for good....
Chosen Solution Loud pop,pop then fuzzy image? Sounds like a capacitor may have blown. Might be worth turning the device off with no power for at least 24 hours and then look at the board more closely as you should be able to see a burnt out capacitor. If it is you maybe able to replace the part and/or clean it up as it may just be dirt or dust on the board....
Chosen Solution Hello, I have an LG 32LB9D UA that had gone out, It belongs to my mother, she had taken it in for repairs, roughly $200 and was told the power supply board was replaced. 31 days later I was visiting and there using the TV when the screen went black but had sound, I went ahead and brought it home with me to help her with it being she took it in once....
Chosen Solution After replacing my battery my machine will not recognize the new battery: Ser#xxx 3882466E, Unit is 3 yrs old had original battery in it. Battery was not holding charge longer then a hour or so also receiving message from the battery icon “Condition: Replace Now”. I ordered the battery from www.LaptopBatteryOne.com,. Original battery was “A1322 they sent me a A1322 After market replacement. I watched M.J’s video (she is SOOOO cute) I installed it as she described by from the video....
Chosen Solution i have a dodge 3000GT stealth, is a 1993 model but the engine is from mitsubishi. i had a problem about 2 months ago with the slave cylinder and i think i mess up the clutch which it got replace, well now i have to put clutch fluid more often than usual, i check the interior or the car where the clutch pedal is and it looks like is leaking oil from the inside and not from the outside....
Chosen Solution Same here, nothing happens!! Model #MVWB835DC2 Hi, Here’s the tech sheet for the washer. Run the service diagnostic mode as per p.2 and check what error codes are shown
Chosen Solution Hi everybody, On my MacBook pro 13 early 2011, I upgraded RAM to two 8GB modules as it was adviced will work. However, my machine only recognizes 4GB out of each module hence 8GB total. Any idea how to make it use whole 16GB available? BTW, It works fine with new memeories Update (12/19/2016) Dear folks, Under ‘About This Mac’ it shows both slots are in use but each one 4 GB instead if 8 GB each....
Chosen Solution I have a gigabyte gaex58- ud5 motherboard which keeps restarting at the logo screen Hi, Have you been altering the BIOS settings - overclocking for example? With the PC turned off and the power disconnected, try pressing the Clear CMOS button on the back panel connectors panel and see if that works. Here’s a link to the motherboard manual scroll to p.23 to view its’ location. Alternatively if that doesn’t work, remove the CMOS coin cell battery from the motherboard for about 10 minutes , re-insert it and check if that works....
Chosen Solution Hello, I am very desperate for help. I’ve asked the most professional computer guys in my city to help and they don’t know how to fix it. I have disabled then uninstalled my mouse on Device management > Mice and other pointing devices > (I don’t remember the name of the touchpad/mouse) > Drivers. I’ve been able to go back to this place by only using Tab, Arrows, Enter, Space And Backspace....
Chosen Solution I bought an iPhone and I didn’t have it for at least 3 months one day it just turned black and it was unresponsive I tried taking it to multiple repair stores they are all swying can’t fix it sorry.Someone help me fast I don’t wanna go to the Apple Store and wast $300 bucks for a repair. You need to determine if the phone is truly dead or just not displaying an image....
