Chosen Solution I have a Kurio 7s, it’s not blue but green/black. I don’t know if that makes any difference. Anyway, once it’s charged up it will only load as far as a screen with a character of a TV screen with shifty eyes. It won’t then power down until the battery is flat. I’ve tried the rest button. is it possible t reinstall the operating system with it in this condition?...
Chosen Solution Hello I have had a issue with my gateway laptop where the screen has about 4 green vertical lines and one red vertical line about 1mm thick all in the same spot on the screen they are always there . But when I flex the screen outwards slightly they go away. On boot up they take a few seconds to completely show they seem to almost fade in when the screen turns on or the machine boots....
Chosen Solution I recently bought an iPhone SE from eBay in a lot of devices. The iPhone SE works, except there is corrosion near the battery connector, and the loudspeaker does not work. The corrosion is in a small area to the right of the battery connector, it doesn’t seem to cover any important components. I was worried the audio IC was busted, but the earpiece and headphones work, so it seems to be a problem with the speaker itself....
Chosen Solution I have a MacBook Pro 2018 (custom build) where my Logic Board has been “burnt” according to the authorised Apple Repair Center. I have AppleCare Protection (I live in Denmark, so it’s not the same as AppleCare Protection Plus, as far as I know). The machine is just about 1 year and 3 months old. It’s been repaired 2 times in February 2019 (logic board replaced) and March 2019 (top case replaced) due to a blinking Touch Bar....
Chosen Solution After catching my iPhone 6 on fire replacing the battery I decided to try and replace all the parts that weren’t working correctly. Right after it caught on fire I cleaned it up, put in a new battery and it seemed to work fine. The loud speaker was a little tinny sounding and the headphone jack didn’t work all the time. I then replaced the lightning port headphone jack with a used OEM part off of eBay and that solved that problem....
Chosen Solution Hi! It’s my first time in the forum and my last hope! I am with this macbook pro 13-inch early 2011, but when you turn it on the display refuses to react, it doesn’t show anything, even the apple logo on the back doesn’t glow. If an external monitor is plugged, it works fine and square, even tough the OSX (el capitan) doesn’t doesn’t consider the existence of a built in display in the laptop I’ve tried p vam reset, battery insert/removal and other sorts of unusual practices, and none seem to bring results I would say the LCD is dead, BUT if I boot on the bootcamp, the windows startup as expected and the display turns on just as a perfect one would do… So, I don’t have any clue of what is happening and decided to share my situation here, so any help would be very welcome UPDATE: After letting Macbook idle for sometime (connected to the external display) , after waking it up, the built-in display worked good....
Chosen Solution I have and imac 1gb 667 mhz ddr2 sdram, 2.4 ghz intel core 2 duo. would like to upgrade the memory. Is it worth it and if so, would i have to remove the current memory to repalce with 2gb or 4gb? Assuming your machine is either this 20" or a 24" Standard RAM: 1 GB Maximum RAM: 6 GB* Details: 1 GB of RAM is installed as a single SO-DIMM module....
Chosen Solution I recently cut the mic from an old MacBook Pro 15" Unibody Mid 2009 and used it to urgently and successfully replace a damaged one in a more recent MacBook Pro. now im close to fixing the older model I thought I would replace the mic just in case I ever wish to use it…. when I got the remaining cable and plug from the MB I discovered has 3 leads and not the two I was expecting....
Chosen Solution the exact correct model of the laptop im having problems with is an hp pavillion g6-2365ea for whatever reason there was no option to select that model anyway the problem is: i am unable to download anything from the internet, when i do, i get a pop up that says: a device attached to the system is not functioning, so after doing some research into this, this error has something to do with connectiong iphones to windows 10, HOWEVER this error comes up even with nothing attached and it prevents me from downloading anything whatsoever....
Chosen Solution no standby light shows nothing @obando sounds like a power issue. Check the outlet it is plugged into. Check the power cable with a multimeter and then check the fuse. This could be an issue of just not getting power to the TV.
Chosen Solution Hi, I have an iPhone 7 Plus here. The home button is not working. Both the return function and fingerprint don’t work. Upon further check, I didn’t find any damage to the home button. No cut or rip on the flex. The flex is in good condition. According to the customer, the home button has never been replaced before. My question is: will replace/reball the turtle IC (U10) on the flex make the home button work?...
Chosen Solution iPhone 6 plus was suffering from low storage volume. It has 126GB and the phone is filled up so that remaining space was on 33MB. Didn’t think much as the phone was still working, so I powered off the phone. Replaced screen, reboot the phone……then phone shows iPhone disabled, connect to iTunes screen. How? I tried to put back to old screen, disconnected battery, reboot, multiple times, but still same thing....
Chosen Solution Pin name: FL5700-2 | Net name: PP5V7_DISPLAY_AVDDH_CONNPin name: FL5700-1 | Net name: PP5V7_DISPLAY_AVDDH Components I need are shown with the yellow marks, From which other phone i can get them since i dont have XR for spare parts? Thanks Please see the image here : https://i.imgur.com/hrR8Z38.png You can get them from the 6 up. If you have a 6 harvest them from the PN5V7_LCM_AVDDN_CONN line. There should be a cap and filter near the connector....
Chosen Solution Just got done refurbishing this iPhone XS max, with a used good OEM Apple Screen and a chassis replacement to fix the cracked back glass. After transplanting all the parts and getting everything all sealed, up I start testing all the functions to make sure it works and the anytime I play any audio at all over 80% volume the phone hard resets and completely reboots. I have no idea where to even begin troubleshooting an issue like this....
Chosen Solution Hey all, I recently dropped my Iphone 8 and it had a case on it, but unfortunately there was an extremely minor scuff on the aluminum frame of my phone so I was wondering if there was a way to replace just the frame or get rid of the scuff. It’s extremely minor, so it’s not a big deal at all but I was just wondering if there was a way to replace just the aluminum frame without replacing the whole back panel...
Chosen Solution Hi guys. I’m looking for some advice. A couple of months ago my wife’s phone screen went dark. Still usable, but everything was darker. I imagine this is what happens when you have a backlight problem, but not an expert. Then last week the screen went off altogether and it appeared the phone wouldn’t turn on. However I could connect it to my Mac and get the option enabled up in iTunes to back up the device....
Chosen Solution i am faced with a delema… i have the rs988 model of the g5 and half my screen is showing like a scrammbled tv. i bought a replacement screen thinking it was a display issue… it wasnt so it must be my motherboard but i cant find a motherboard for my model i was wondering if i can use my rs988 screen, body, and other internal parts from the rs988 can be used with the h850 motherboard....
Chosen Solution I am attempting to replace the motherboard in my camera. I have removed every screw and ribbon from the front of the panel, but the motherboard still will not come loose. Is there a hidden screw that I am missing? Yes! A hidden screw is located under the plastic flap labeled DC-in. This screw connects the motherboard bracket to the rest of the camera enclosure. Once you remove that and have removed all of the other screws, the motherboard will come free....
Chosen Solution I have a Lenovo Ideapad Yoga 510-14IKB, model 80VB. I have spilled some liquids on the keyboard and i dissasembled everithing except the keyboard. It looks encapsuled… Is there any way ot taking it out? Hi @frana_brusca , The keyboard is part of the upper case assembly and this is considered to be a complete unit. Here is a link to the service manual for your IdeaPad. Scroll to p....
Chosen Solution Hi, I’ve noticed my TouchID has stopped working ever since I gave my phone to a ’technician’. My guess is he took the original parts and gave me fake ones. Because of that, it just says unable to make Touch ID when I go to make a fingerprint. My question is, can I just get a new one from iFixIt, and follow the guides, and have Touch ID back?...
