Chosen Solution Whenever I try to restore my iPhone 4s in Itunes, I get error 14. I tried restarting my computer and using different usb ports but nothing helped. Also, ever since I got the error for the first time, my iPhone has been stuck in recovery mode loop. I tried using 3utools to flash the firmware. It failed during the “Writing filesystem” step. Please let me know how to fix this issue....
Chosen Solution This is a very helpful site for the tear downs and other basic needs. But my iPhone (which has no warranty for the stupidity that is me) has a jammed power button, and my vibrator for rings is very “fart” noisy. I don’t have the money to get a new phone or do a trade. So I was hoping someone could tell how to do it myself! How do i fix a jammed power button and a bad vibrator?...
Chosen Solution Hello can anyone tell me if i can replace the bracket that made pressure to the keyboard flex? yesterday trying to align the flex the bracket was broken. here is a photo. Here’s the needed connector part Keyboard Connector (30-pin). Carefully pop off the compression bar and insert it back in on yours. As long as the base is not damaged that should do it! If not then you’ll need to remove the old connector and replace it fully....
Chosen Solution My screen broke, it leaked quite badly but I could still see bits of the page I’d been on. I turned the laptop off but when I turned it back on the screen was completely blank. I’ve replaced the screen with an identical model but still nothing. I took the case off to check connections and everything but can’t see an obvious fault. When I turn it on the fan starts but then slowly comes to a stop....
Chosen Solution So, I have a Macbook Air 11" 2014, and I was a dumb***. The person who has it dropped it and physically damaged the screen, half the screen was covered in LCD destruction mess. So I decided to replace the screen myself. Mistake number one: I plugged in a screen from a 2011 Macbook air 11". It worked, somehow. The LCD on that one was broken too, but it was a start....
Chosen Solution My lenovo ideacentre horizon 27 won’t start up and the screen won’t turn on. The power button is on (lid up) and the fan is on but when I press the power button the computer won’t start. I have tried checking the cord, pressing the power button for 10 seconds but no luck! Please help! Hi @voken, Disconnect the following from the computer and see if it at least powers on: Any external devices connected to the computer, including the mouse....
Chosen Solution Hello! I have a late 2011 unibody MB Pro, 15", part number A1286. I believe the GPU on the logic board died - blue screen with vertical lines galore. I want to attempt and replace the logic board but am not sure of the part number. The SN of the unit is C02HL7LZDV7L and I think the proper PN for the board is 661-6081 but would like confirmation. Thanks!...
Chosen Solution Having a very bizarre problem with my machine. It only charges with non-OEM charging cables. I have an OEM 60w and OEM 85w charger and when I plug either into this machine, I get nothing. No green light or orange, system profiler doesn’t detect being plugged in, and battery drains as normal. I have other machines which work fine with these cables so I’ve eliminated the possibility of the cables being at fault....
Chosen Solution Hi there oldturkey. So I have almost the same issue as on here Boot loop - Missing SMD? Need help identifying. Maybe you could assist me since on OP picture he is missing a FL11. I am missing both of the components next to each other, the one left to the one OP is missing. Is this also a FL11 ? Quane, the one to the immediate left of FL11 is C279 the next one is C23....
Chosen Solution Hey, I recently installed a new battery in my 6s, but it now resets at anywhere between 30-50%, when it turns back on it reports either 1%, 10% or whatever % it was at last. I believe I installed it correctly (fullcharge 8hrs, full drain, full recharge, reset phone using power and home button). A low battery log is below. Any help is much appreciated. Thanks Doug {“bug_type”:“120”,“os_version”:“iPhone OS 13....
Chosen Solution My girlfriend smashed her iPhone 6 screen, and after a few weeks the smashed screen died. So I bought a new screen for replacement, and I followed the instructions, but now after closing with the new screen, the phone won’t turn on and the pc does not recognize the phone. I forgot to test the phone before changing the screen, I think that the problem might be the logic board or the battery died....
Chosen Solution ipod is diabled connect to itunes. forgot password. Linda Rhodes, try this “you can unlock it putting the device into DFU mode and then restore it with iTunes, BUT this will erase all data on your iPod. Here is an excellent description how to place your iPod in DFU mode. The other thing you can follow is what Apple says “If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time....
Chosen Solution The iPod works when connected to the charger in the wall, but not otherwise. I suspect the battery but no way of testing. How? you are correct. most of issue which you mentioned occur from the battery. you can analyze the battery using battery tester if battery not swollen. if battery swollen not requred to test just replace it
Chosen Solution My laptop was plugged in and charging. Came back to a flooded room and the adapter was totally submerged. The laptop is still working but the adapter is damaged. The socket it was plugged into is currently not working as well. Hi Nana Kwame You mentioned that your laptop work and the adapter is damaged. The easiest way is to test it, either find a spare or test it directly at the computer shop....
Chosen Solution I have a 59" LG TV (60UJ6300) that one day just stopped coming on. Actually, it started with the sound going in and out, and then nothing. The red light on the power button comes on and reacts to the remote, but the screen stays dark, with no sound dark. If a light is shone directly onto the screen when the set is “on”, one can faintly detect the LG logo slowly flashing on and off....
Chosen Solution I was doing some research into replacing my DS Lite’s ancient battery as it barely holds any life anymore (an hour at best) & I cannot tell if it is swollen under the deadly grip of my childhood NERF case on it (I will take precautions in removing it, don’t worry). However, I couldn’t help but notice that the original battery is 1000 mAh, but the iFixit equivalent is only 850 mAh....
Chosen Solution Mine sounds very tinny, it wasn’t like this before.I think the jack is faulty as it sounds a bit better if i press the metal back and the front panel together. Hi You could try cleaning the jack with some isopropyl alcohol and a Qtip/cotton buds If you decide to try this don’t pour the alcohol into the jack ,dip the cotton bud in it then clean until it looks clean If that doesn’t work it could need replacing or repairing Here’s a guide on disassembling the iPod iPod Touch 3rd Generation Logic Board Replacement Once disassembled you will need to ether reflow the solder joints or desolder the Jack depending n if your replacing it or not Here’s a link to the part you may need https://www....
Chosen Solution Now I am planing to upgrade the CPU of my early 2006 iMac. I am buying all the tools that are needed during the upgrade. But the thing that I don’t understand the management of the thermal paste! I have no idea how is applied where it is needed to apply, and I cannot find it on “Installing iMac Intel 20” EMC 2105 and 2118 Logic Board" if it is needed when I do change the socketed processor thanks...
Chosen Solution I updated My ipad3 4g cdma 32gb to ios9.3.2 it keeps restarting over and over every 3 minuets i tried to get back to the older update and it didn’t work ! then i updated it to 9.3.3 still the same .. Any solution for my problem ? Should be a pretty simple fix. This for sure sounds like just a software issue, so we can get that fixed in a matter of minutes....
Chosen Solution Hi I have a iPhone 6s plus that I have had to replace battery around 8 times as the battery works fine for around a month then dies at 50% like its flat pug it in I get 50% than continues till the battery is completely drained replace battery then like new for another month it’s be like this since it was stolen from me and I got it back smashed now I’m about to replace the U2 Ic but I want to no if anyone knows of any other chips that can cause this so I can repair Update (06/29/2018) Hi again I’m really stuck with this one I have replaced Tigris Ic mosfet ic tristar ic I’m unsure if it’s fixed the shutdown issue yet but in addition to that I have released its going through power like nothing one hour YouTube video used about 30% so I looked at big pmic and found caps c2016 c2013 c2017 c2020 c2014 c2015 c2019 and c2021 all to be shorted can anyone help with this issue as I’m sick all I can think of it replace the pmic and no sines of water damage or corrosion gave it a ultrasonic bath...
