Posts

Chosen Solution Locate vacuum line to transmission The year range is pretty non specific. If the truck has a vacuum hose to the transmission (to the vacuum modulator), the line will be a metal tube attached to the large tube that the transmission dipstick is in. It will come up and connect to a hose that will run to the base of the carburetor. The function of this line and the modulator it goes to, is to give the transmission some sense of how much throttle is being applied during a shift to make the shifts softer or harder depending on load....

Chosen Solution Why is Logic board overheating after replacing the charging? Likely a faulty charging port, try unplugging the port and seeing if the logic board still gets hot. If it still gets hot, it might be a motherboard issue. If not, all you need is a new charging port.

Chosen Solution Hi there, I can’t find any fix to my problem anywhere, so I decided to ask here: I’ve purchased a new battery from this site, replaced the old one and everything works… except for the loudspeaker. I bought another loudspeaker (original) and replaced the old one, but no luck. Could you help me? Thank you =) Did you follow this guide exactly? There is really no reason for there to be any impact on the speaker....

Chosen Solution Noticed the left side internal speaker has much weaker volume compared with the right side one, thought the speaker itself might be broken, so, replaced a new one, the sound is slightly louder, but still weaker than the right side one. What could be wrong in this case? Any thoughts? Thanks, Use the balance control to bias the volume in Sound Preferences to be equal between the speakers see if that is enough....

Chosen Solution I have seen this question asked before, but always for different computers or with fixes that have not worked for me. I feel as if there is something very simple I am missing, so here goes: I have just replaced my HDD with a Seagate 500 gb HDD. I originally replaced it it with a WD 1 TB HDD and got the same problem of the blinking folder with a ?...

Chosen Solution ive been working on this macbook for about a week and what was once just a matter of reinstalling the os and replacing the battery rapidly turned into an issue with finding the boot directory and finally to it not powering on or even receiving power. ive tried to turn it on with the power on pads but even that doesnt work. any idea what the problem might be?...

Chosen Solution I was wondering if it is possible to swap a 2010 macbook air logic board with a 2012 one. Would there be any incompatible ports/fitting? Thanks A few differences, SSD for sure to start with, I/O board has a different audio IC, hard to tell if a 2012 board will recognize the one from 2010, not sure about trackpad compatibility either. Hope someone else has more in-depth info.

Chosen Solution Couldn’t find my charger last night and I left it at 6%. Hasn’t turned on today. I’ve read solutions for a similar issue on here which involve opening it up, which is the last thing I want to do. It’s no longer under 3 year warranty as Applecare has expired. Weird situation is that the laptop had liquid damage back in 2017. Turned on once but soon after it died while the lid was closed....

Chosen Solution The machine used to be as such : Main Drive = Samsung 850 PRO 512GB / Caddy OWC = SanDisk Ultra II 960G. Boot on 850Pro and storage on Sandisk. (Both 6Gb/s if not mistaken) Randomly on boot I have question mark folder. I swap the drives and can boot on the 850 Pro now in the caddie. Both hard drive mounted but when I try to copy on the Sandisk I am greeted with a “Error-50”....

Chosen Solution hi guys my polaroids are coming out very pale. the black is not very vivid, ive tried playing around the modes too either its too dark or its too light for the same image. does the film expire? and does it affect the image quality? if the film has not been stored in a stable environment ie too hot or too cold this can cause the film to produce images that may appear washed out or pale....

Chosen Solution Hi, iPhone 7 backlight has 4 pins. Can somebody please point me to a datasheet or give me information on these pins. (voltage) Thanks! ANSWER UPDATED: I don’t think there is anything published on the flex pinout. However, the iPhone 7 has one Anode output (PP_LCM_BL_ANODE_CONN) and two Cathode return lines (PP_LCM_BL_CAT1_CONN & PP_LCM_BL_CAT2_CONN) designed into the backlight circuit. There isn’t any direct continuity between those lines and the accessible “pins” because they are probably being treated inside the IC that is on the flex....

Chosen Solution Hello everyone, I’m a Sunday iPhone repairman in my community and had recently tested a small batch of iPhone X and Xs JK incell LCD screens. I was very suprised as most of them had ghost touch issue after a few days of usage on the phone. I thought that those JK screens were considered as especially good quality even thought they are at the bottom of the price scale....

Chosen Solution A friend was curious about upgrading his 320gb xbox. He thinks that since the hard drives look similar (computer hard drive and xbox hard drive) that it might be possible for it to work. Someone please help. You might be able too. No, promise. Both Xbox’s use SATA type drives and can be easily plugged in. Tho I don’t know if Microsoft formats their drives a certain way. But if so i wonder if the console will format it once its attached....

Chosen Solution Is optical drive cable much slower than hard drive cable? In numbers, if a data takes 100 seconds to be transferred in the hard drive cable how long will it take in the optical drive cable? I want to replace my optical drive with a SSD and I’m wondering if it wouldn’t be significantly better to put the SSD in the hard drive place and the hard drive in the optical drive place....

Chosen Solution I am looking for the Samsung phone which should be waterproof. i want to confirm this is Galaxy S10 Plus is a waterproof phone? IP68 dust/water resistant (up to 1.5m for 30 mins) You can read here what means IP68 https://en.wikipedia.org/wiki/IP_Code Dust-tight Immersion, 1 meter (3 ft 3 in) or more depth according to: https://www.gsmarena.com/samsung_galaxy_… Hi, No phones are truly water proof. Water proofing gets weaker over time, so if your phone is 2nd hand or refurb, then the water proof ratings should be taken with a grain of salt....

Chosen Solution I had bought the 2018 version of Mac Mini in 2020. The last intel chip in mini. I used the iFixit kit to upgrade the RAM from 8 GB to 64 GB and it worked fine for a year. Suddenly after the Mac OS Monterey update the custom RAM just does not work and keeps crashing the mac. It was actually quite difficult to debug that the issue was in the RAM....

Chosen Solution Hey! This is my first post here, and since I couldn’t find guide on how to replace the right speaker of my laptop I figured I could ask in here, thanks in advance for the answers and happy holidays! A little more info on why I need to repair: https://www.youtube.com/watch?v=0FI35H6M… That exactly happened to my laptop when I opened it after I closed it last night. That’s it, didn’t do anything that could’ve caused it and I don’t even have Bootcamp installed (regarding the known Bootcamp speaker bug)....

Chosen Solution Hi. Recently I replace wifi antenna from my iPad2. During replacement I lost 2 small screws for hold wifi antenna. So I just use adhesive tape to attach it to body and I finish replacement. I check my iPad wifi strength with iPhone5 and iPad mini and i found my fixed iPad shows a little bit less wifi strength compare to other devices. Is this iPad use it’s rear panel it self to use as the antenna?...

Chosen Solution Replacement for ac power adapter. For this laptop, I cannot find an adapter from HP on their website, so the OEM adapter may be “EOL” at this point. For this model, you may need to settle on a used OEM adapter. The HP Spare# is 239705-001. I’m not going to make any recommendations on where to buy it, but what I would do is take the Spare# and check sites like eBay for it specifically....

Chosen Solution I have a kenmore 500 series washer that restarts by itself after cycle finishes, unless I open lid or stop by switch If it restarts when you close the door, the push to start switch has shorted out. Replace it. I can better give you a solution if I have the model number.