Chosen Solution Hi, all just wondering if my phone is hard bricked or not since I can’t find any information on my specific device it won’t turn nor vibrate the red light goes out and return after 10 seconds press of power button and the hard rest process. Is there any solution to it or is the phone dead? Hi, Try this link and check if you can force flash the stock ROM Here’s a link to the available ROMs
Chosen Solution My tablet was charging while it was on then then the next day took it off the charger to play with it and it won’t turn on? I have Tried everything the home+volume up+Power button to reset it and nothing. I’ve tried different chargers and all chargers work on other devices so I dont Know what else to try? try disconnecting the battery and reconnecting. also check the charge port for damage
Chosen Solution My iPod hasn’t been playing music for some time now. The clicker still makes noise and I can hear feed back when I plug in the head phones, but when I play a song I don’t hear any sound. My library is all there so I don’t think it’s a harddrive issue. does anyone know what the problem might be? Is there anywhere where I could send it to get refubished?...
Chosen Solution The keyboard and trackpad on my macbook are not responding, and the USB ports don’t connect to an external keyboard/mouse. But the system boots up and gets to login perfectly fine. It also ran hot before, with the fan continually running at full turbo. Likely a swollen battery. Pull the battery, press and hold the power button for 2 minutes, then plug in MagSafe charger.
Chosen Solution Hello, Here is my issue : The keyboard (except the power button) and the trackpad are not responding. The keyboard lights but the shift key does not lights the led. The trackpad unlock well the “force touch”. The keyboard and trackpad works perfectly well when I boot on Linux or Windows USB key. Apple “Genius” Bar said : replace ribbon cable or replace all the top case (and give us money)....
Chosen Solution Hello I only see 5 Guides on this System Model, I will do the replacement Keyboard on my own, Can and would you like me to make a Guide for this? Please advise before I start. Thanks.. You need me to take pictures of steps I do? Advise and I will make the Guide! Thanks! this will be my contribution for this AMAZING SITE! zahirpocho any guide is always welcomed....
Chosen Solution Hi all, First of all thanks for these very helpful guides. Here is my problem. I have received a MBP on which the keyboard and trackpad intermittently stopped working. I knew it was a hardware problem as it happened straight at boot time. I first suspected a loose connection, so I did steps 1 to 14 of this guide : MacBook Pro 15" Core 2 Duo Models A1226 and A1260 Keyboard Replacement And then reversed it....
Chosen Solution I need directions on using a kitchenaid stand mixer speed disc tool Part # 4164839 Try downloading the manual at the top of this page: http://www.manualguru.com/kitchenaid/kit…
Chosen Solution A few months back I purchased the Manta toolkit. I had already owned a Pro Tech Toolkit. I have done several PC builds in this time, and have noticed that the driver with the Pro kit, along with the smaller driver in the Manta kit, both exhibit some magnetism through the bit, preventing screws from falling off the bit. Unfortunately, the larger driver in the Manta kit does not exhibit the same magnetism....
Chosen Solution Hi, I am preparing to turn my late imac 2012 27” display into a secondary screen with a driver board.* It has also a speaker connector that accepts a 4P PH2.0 connector, but I do not know how to wire the odd speaker connector to the 4P PH2.0 connector. Could a helpful person assist with a pinout for this? *for reference: (assumption since I won’t actually open this mac until New one arrives, as I’d be left without a machine otherwise) I plan on using HDMI+DVI+DP LCD Controller Board edp Monitor Kit for imac 27" LM270WQ1(SD)(F1) board unless I will find another part code once i unmount screen...
Chosen Solution Specifically I have a 1998 Honda Civic Si. Sometimes when I get into the car (after it being parked for multiple hours), when I pull away I hear a breaking kind of sound from the rear passenger tire area. Usually happens when it’s cold or raining I’ve noticed, not really in hot or warm weather. Sometimes when I’m trying to reverse out of my driveway, the car lifts up on that same side of and won’t move back, despite no foot on the brake, parking brake off and in reverse....
Chosen Solution My desktop will not power on what so ever. I tried resetting the PRAM and the SMC and nothing is working. When I press the power button and there is sound or not picture that pops up. Is it a bad power supply or is even else having these problems? Open it up and check the diagnostic LEDs. The LED’s are on the logic board to the right of the RAM slots and between the RAM slot and the HDD sata connector LED #1 Indicates that the trickle voltage from the power supply has been detected by the main logic board....
Chosen Solution I tried all the steps but the only thing that the macbook does is a little “clic” near the power button after I pressed it to turn the macbook air on. The light comes up for a few seconds, then the clic, then the light off. I tried to boot from an external usb drive with a Snow Leopard installed, but it was impossible since no boot process appears to work....
Chosen Solution Macbook Air (Early 2015) is not turning on and no charging light. It is not the cable because it charges my other Macbook and I have already tried reseting the SMC(it did nothing). So I know I am going to have to fix some hardware but I don’t know what is wrong. BTW I do not have the tools to go inside it so thats why I am asking so I can get the right ifixit package....
Chosen Solution I would like to rejuvenate my Mac Book Pro 2011 that had some issues (screen loose, overheating, keyboard lights not working) I had no problems for the 2 first tasks, but the lights still not working. I’ve reset reset the PRAM, but nothing I’ve ordered a new set of lights and replaced the old one and… nothing. At this point I’ve tested each single led and they are woking fine (also in the old set)....
Chosen Solution I just changed the battery of my macbook pro retina mid 2012. The thing I noticed is that now that I turned back on, I have all lines on the screen. The strange part is that they come and go. I mean, sometimes the LCD screen works flawless, and sometimes it is just full of lines. It can depend from the battery? Cause once I use my old one the problems seemed not existent....
Chosen Solution I just replaced the battery in my MacBook Pro using the iFixIt replacement kit. I got exactly the right battery kit: MacBook Pro, Retina Display, 15’’, Mid-2012. Everything went smoothly when replacing the battery, but now my laptop is barely usable: everything is painfully laggy, including cursor movement/typing, and the fans run on maximum constantly. I tried the SMC reset—no effect. I downloaded coconutBattery to get some info, but not sure what to make of it:...
Chosen Solution I am thinking about buying either the new (mid-2012) MacBook Pro 13” or the new MacBook Air 13”. But I have a question. Since the MacBook Air is not RAM upgradable, I should buy it with the max RAM available in Apple Store (8 GB). But, what about the MacBook Pro? If I buy it with the max available (8 GB) in the Apple Store, will I be available to upgrade it to 16GB at some time?...
Chosen Solution Really hoping someone can help with this. We have a Maytag MDB7749SAM0 dishwasher. When we turn on the normal wash cycle it starts fine, runs the cycle for maybe 10 minutes and then pauses for maybe 3-5 seconds and then goes back to the wash cycle for an additional minute or two, pauses, starts again repeat repeat. It will do this indefinitely until we hit cancel. We can run at least the rinse only and the light wash cycles without a problem....
Chosen Solution The engine have problem on idle sometime eng shutdown Danisand, Error code P2228 is Barometric Pressure Sensor A Circuit Low and P2004 is Variable Tumble Shutter Valve Stuck Open Possible causes Faulty VTC Shutter valve actuator (Stuck open) Missconnecting or pull out the vacuum hose Faulty Variable tumble solenoid valve Variable tumble solenoid valve harness is open or shorted Variable tumble solenoid valve circuit poor electrical connection from here....
