Chosen Solution My Macbook air 11" Mid 2012 keeps shutting down and then when I try to reboot it does not come back, the power button does not respond at all. After a couple of hours it sometime boots and takes me to the login but shuts down shortly. Sometimes it does not just want to boot at all. The device is charged to 95% and have tried the same with power connection on as well....
Chosen Solution Hi all. My problem is a bit odd or I’m just not accepting a completely dead battery. For the last couple months, my Macbook Air (Early 2014) has been dying after 10-20 minutes of not-connected usage. The battery almost doesn’t go below 90%, it simply dies. One weird thing is, it has been 619 cycles so far and Coconut Battery -plus other battery apps give 77% battery health. This battery health level is also changing every time I plug in & out my charger, but somehow it fixes itself to 77% after a little time....
Chosen Solution My MacBook Pro fell off the coach. It is beeping. How do I remove and reseat the memory modules? All fixed! My husband took off the back and removed the memory modules and then reinstalled them by following instructions at support.apple.com after determining the model of the computer. I got the idea of removing and reseating the memory modules from google … which led me to this site. Couldn’t find answers on this site though … so hope the next person with this problem finds this answer....
Chosen Solution Hi, Sorry for my english. I have 2 Macbook Pro 15 Late 2011 with the same problem. In first time, i have reball the GPU, i have check, i maked a GPU panic test with different benchmark tools. The computer works good during 3-4 weeks. And, apple release the Mac OS X 10.13.4 and i have install on the macs and computer boot, i see apple logo, bar progress and when i need to type my password, impossible to see the LCD....
Chosen Solution I collect jack-in-the-box and related items. So I have a limited edition San Francisco music box company court jester. It is very pretty and from what I understand worth quite a bit, but the worth to me is so much more. Its my fave one! Here comes the rant. I have spent all morning looking for his missing accessories! this hasn’t been my first search either! When he was given to me they were not there....
Chosen Solution I recently got my phone screen fixed. I turned it on and it was stuck in recovery mode with support.apple.com/iPhone/restore at the top of the iTunes logo. I tried restoring it with iTunes on my computer multiple times but it stops and error (9) pops up. Any suggestions on what to do? Hello @abbylww0, Error 9 is somewhat related to dropped connection. There is more than one cause that can lead to this failure....
Chosen Solution I dropped my iPhone XS Max in the sea a couple of days ago. I turned it off immediately and left it to dry. It started working for about an hour after 12 hours before it turned itself on and off again. I left it to dry again for 24 hours and it worked again before turning itself off again. Now every time I try and turn it on, it goes on to the apple logo before turning black and turning itself on again - it’s in a constant loop turning and on and off....
Chosen Solution Hello, Yesterday i replaced a screen on a iPhone 6 and turned it on and it worked perfectly. Then, when putting on the LCD bracket, i accidentally put the little longer screw from the top left in the middle hole. After that the iPhone turned on and i can see the apple logo, but it never came to the lock screen. Then i tried to restore it on iTunes, and iTunes would gladly restore it and the restore finished on iTunes but has never finished on the iPhone....
Chosen Solution Hi there! i need to upgrade my ram to 4gb. Found really cheap memory in a n online shop here in Portugal, but not sure if it is compatible. http://www.overvoltage.pt/loja/detalhes…. Please take a look and tell me if it’s ok to go!!! Thx iFixit!!!! Model Name: MacBook Pro Model Identifier: MacBookPro3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.2 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 4 MB Memory: 2 GB Bus Speed: 800 MHz Boot ROM Version: MBP31....
Chosen Solution Hello I just about to replace samsung z flip 3 5g rear glass replacement there is lcd or digitizer also need transfer to new glass is it very risky to remove and transfer to another new glass? I saw youtube but new glass comes with lcd or digitizer together But mine is only glass nothing comes with Please give us some advise thanks Kyuho Lee a glass only repair is not as easy as it sounds....
Chosen Solution Clean light blinks seven times and dishwasher won’t start The blinking clean light indicates the control did not see a 2 degree or a 4 degree increase in water temperature during the first 8 minutes of the main wash. To clear the blinking clean light: Press HEATED DRY, NORMAL, HEATED DRY, NORMAL and then let the dishwasher run for a two minutes and then press Cancel/Drain and wait for it to complete the drain cycle and then your dishwasher will operate normally again unless it does not detect a increase in the water temperature again....
Chosen Solution As per title. My laptop will power on fine fan goes and all but no display will show until I force power off then power on again then it’ll spring to life. Hmmm… Sounds like malware to me. Use the below guide to check for viruses that can do anything from steal your passwords to the problem at hand. Hope this helps! How to remove malware from an infected windows PC
Chosen Solution I replace glass for the Galaxy S3 all the time, and I’ve been doing fine. I also have succeeded in replacing the glass on the Note 2 as well. However, I find some of Galaxy Note 2 LEDs don’t work after a glass replacement—indicating I must have caused some damages to the LED. I don’t see any cracks, and I only apply 70 °C of heat to loosen the adhesive....
Chosen Solution I had a small crash that bent up a small plastic support piece for the left rear arm. The drone still flies, but that rotor isn’t flying parallel to the ground anymore (even with some duct tape support): https://goo.gl/photos/xxZGB68M9ZvfhDt16 top view and rear view (broken support is covered in duct tape) I found Where to buy replacement parts, but I can’t tell if this part is part of the middle frame, upper shell, or bottom shell since it doesn’t look like it’s connected to the top or bottom shell....
Chosen Solution I have a WRS342FIAW00 Whirlpool and the interior lights flash like a strobe light when the door is opened? Has anyone else had this problem? Hi @lockheed1 , Not your exact model but there may be some answers in this link that might be helpful. Whirlpool Refrigerator Interior Lights Flickering Maybe try adding a bit of diode electric grease to the light connections. Should prevent any further problems of moisture getting in the contacts....
Chosen Solution Every time I turn on my KitchenAid mixer, it emits a loud screeching noise and I have no idea why. Any ideas? It seems that the gears which turn the beater are either lacking grease or broken. See our guides here KitchenAid Professional 600 Troubleshooting Wow, this is a really old post, but I found the problem. It is the brushes. I bought a used one (KT2651) that was slow to move and squealed....
Chosen Solution Hi, I would like to buy an older mac mini (2012) and replace the wifi n card with the new wifi ac card of the Mac mini 2014 is this possible ? thanks Nope entirely different connector If this answer is acceptable please remember to return and mark it. To expand on machead3’s answer, compare the existing AirPort card connectors in the 2011/2012 Mac Mini: 2011 https://d3nevzfk7ii3be.cloudfront.net/ig… 2012 https://d3nevzfk7ii3be....
Chosen Solution I have a Unibody MacBook that I purchased used and it’s in great condition. I don’t have the original install discs, but I do own the full Mac OS 10.6.3 (Snow Leopard) install that I purchased for another computer back in the day. I used that to do a wipe and clean install, and have downloaded the updates from Apple to get it up to 10.6.8. I would like to get it as updated as the Unibody will allow, but 10....
Chosen Solution Hi, Last week my 2012 MacBook Pro’s screen died. I brought it into the local Apple store, and was told that the backlight was broken - we did the flashlight test. I ordered a new (used) screen, and after replacing it - it’s still a black screen with no backlight. I’ve: -reset the SMC -reset the PRAM Nada. The keyboard lights up, but the apple on the back of the screen does not....
Chosen Solution Everymac.com says this model uses a mini sata connector for the hard drive. So I’m wondering… Has anyone ever tried putting a standard length (ex: Samsung 840 EVO mSATA) in a macbook air 2010? I understand that the difference in length would mean that I could not screw down the SSD but I’m sure I could figure out an alternative way to hold it in place. I’m just curious if standard mSATA SSDs will function correctly if installed in a macbook air 2010?...
