Chosen Solution I have a refurbished MacBook Pro that will only turn on when plugged in. It says it has 100% battery, but dies instantly if the power cable is unplugged. I have tried resetting the SMC and PRAM. I’ve included a screenshot of coconut report and the system information for the battery: Battery seems to be faulty, there are 2 values well out of standards: voltage is not supposed to be 5v....
Chosen Solution I’m certainly not an expert, but I am fairly experienced in appliance repair. This one is a head scratcher. Microwave doesn’t heat. Diode, cap, transformer, and magnetron all originally tested fine. Current draw right around 10 amps. Out of frustration, I’ve replaced the all high voltage parts(Cap, diode, trans, and magnetron), Still no heat. Also checked(and double checked) thermal switches, fuses, door switches, wiring, and relay outputs. Anyone?...
Chosen Solution The toslink jack connection to the zeppelin air will work only if I’m doing a small pressure with my fingers to the right side (with reference to the back of the zeppelin air) I could use every help :) Thanks Update (04/28/2018) Hi, Seems as though the socket may be faulty, loose or have a bad connection to the motherboard. What type of connection are you using? If you are using a mini Toslink cord then try using a mini jack stereo audio plug and check if that works normally (or vise versa)....
Chosen Solution Hello there, I am wondering. Is there any possible way to swap out the Sony card reader and switch in a MicroSD card reader? I understand the pinouts are a bit different and shape, but other than that the size in dimension make it seem possible. Or will the new security on these cards prohibit me from using the MircoSDHC? While I agree that piracy is illegal, it is not the reason to blame for Sony using the proprietary card on the Vita....
Chosen Solution Hello everyone, I am trying to recover the iPhone 7 (A1778) that is stuck at the boot - only showing the Apple logo. When I go to DFU mode of the phone and try restoring it via iTunes - I get an error on ‘Waiting for phone’ step. (Error code 2009 on one PC, and error code 21 on the other). I am using a genuine lightning cable. When I try firmware update from another tool like 3uTools, the error is stated like: ”ERROR: Unable to place device into recovery mode from DFU mode”....
Chosen Solution I just found out that my Iphone is in recovery mode. I have no idea how to get out of recovery mode or how to fix it. What do i do? It looks like just shutting the phone off then turning it back on should pull it out of recovery mode. If that doesnt work you will need to connect to your computer and recover it. This option is fine so long as you have backed up your phone recently, otherwise you will lose any information you’ve acquired since the last back up....
Chosen Solution Two days ago for replace home button I unplugged screen connectors/sockets without power off phone and shows display. after I unplugged sockets, display/image went out and didn’t come after plugged sockets. now there is no image on my phone. Phone and home button works but as I said no image on phone. What can I do now? -itunes can find my phone, -I shined flashlight on phone no icons or anything, -Someone can call my phone,...
Chosen Solution I recently replaced an iPhone 6s Plus Battery for shutting off randomly but it keeps doing the same thing as the old battery. What can I do? There are a lot of poor quality batteries out there so ideally you need to use a known-good battery (the 6S and 6 Plus batteries are compatible) to help you determine if the issue is the battery or something else. It could be the charge port or the charge circuit on the logic board....
Chosen Solution I’ve already replaced the battery in my iPod. And it still won’t turn on or be recognized on any computer or take a charge. I want to keep hard drive because of all my music. Now I’m looking into buying a new logic board. Is there a certain kind of board I need to buy? Is there things to watch out for when switching out logic boards? Here’s a link to a logic board on ebay for $50 you can purchase, which has been taken out of a 5th gen....
Chosen Solution Quick question: Is 250°C and Mid Air flow ok when reflowing chips? I choose 250°C because it is lead free solder as far as I know right? @md20 yes it is. A few words of advice from me are that you need to watch the temperature closely. Do not rely on the thermometer on your reflow machine. You need to have that temperature on the actual IC not the nozzle....
Chosen Solution I recently got my screen fixed on my phone but the screen is popping out. Now i was wondering if it is a bad thing to just leave it. Yes, you stand the risk of permanent damage to the phone. You can cause dust to creep into the office itself and cause heat issues, it’s just too risky to try using it without it being properly assembled.
Chosen Solution Im not sure what happened but my ethernet port is no longer recgonizing my cord. Is there any way to fix it at home? (I know for sure that the problem is the port on the xbox) Hi, Couple of things. Have a look with a magnifying glass into the ethernet port and make sure that none of the connector strips have moved out of position, i.e. that they are all straight and parallel....
Chosen Solution Hi all.. i have an old galaxy tab pro that has a cracked screen.. and i am using it as an android media center using kodi.. I have a mhl micro usb 2 hdmi adapter with remote that works very well.. but i would really like to loose the wifi and use a ethernet connection.. but i dont know if this is possible… is there anywhere on the mainboard where it would be possible to solder an rj45 socket to… And just fyi the mainboard is no longer in the tablet casing but is in a homemade case....
Chosen Solution It´s only with the Functions Keys Devices, So I need to know if the MBP 2017 with Function Keys has any changes on placement of the WIFI Modul. I have WIFI Breakups when inserting an USB-C Adapter/Device. Apple says its because the WIFI Modul is to near build by the Ports. So I want to know if Apple changed the WIFI Modul Position on Motherboard. Maybe I can change/replace my 2016 for a 2017 MBP, bought 1 month ago....
Chosen Solution My ps4 was infested with roaches and my ps4 wont turn on fully anymore. In the picture there are burn marks where I’m pretty sure roaches touched and got fried. Do I need a new power supply or can I fix it myself? PS4 power supplies can be really hard to fix. Not that it can’t be done but it can be really difficult. If you are an experienced tech then you might be able to figure it out but if not I’d recommend replacing it....
Chosen Solution I have an Epson projector I got with a blown lamp at one point, at which point I pulled a 3.5k lamp from a dead EX3210 (same as the EX3212, without HDMI). I got a NOS lamp on eBay from someone who had some cheap OEM lamps in box, so I got a new lamp for the price of a knockoff; the 3.5k hour lamp got me enough time to put a proper replacement in the EX3212 :-)....
Chosen Solution can u help me with a problem, my brother mfc- 255 it wont print on paper.. it work properly but no ink on paper, if i look close i see dots on paper that it was trying to print but i dont know how it is not printing on paper can u help me with this problem ? Junior I’d start with cleaning the print head. This video should help....
Chosen Solution Error code OL for a kemore washer model # 27052600 sharrybaseball The OL error code indicates that the washer is overloaded. If the washer is not overloaded, this could indicate either a drag on the drive system or the control board is failing. Empty the washer and spin the basket to check if it rotates freely. If it does not, then something may be caught between the spin basket and the outer tub which could give you an OL code....
Chosen Solution My m310 left mouse button does not drag and drop properly. I can grab and start to drag and then it lets go and the pointer continues on. Right side works fine. Maybe the following will be of use: https://larryprevost.com/2017/03/logitec… Apparently this is a common issue with these. Mine lasted about 8 yrs before the left switch started going flaky. I would have fixed with a new micro switch but the above guide from “prop man” gives a link to the switches that says “not available” currently....
Chosen Solution My amp keeps cutting out, shuting off the sound. The radio keeps working. Rick McAninch, you did not give us a lot of information about which year your Yukon is or which amp. I assume it has the Bose system. Should be inside the center console, just pull the cup holders up to see if it is there. AMPLIFIER REPLACEMENT REMOVAL PROCEDURE If equipped with a Bose(TM) amplifier, remove the radio amp fuse located under the hood electrical center....
