Chosen Solution Does anybody know how to setup/use a multimeter to check iphone parts like dock flex connector, microphone, headphone jack, etc. It would be very usefull since the only way to check for funcionality of these parts is trying with a newone and we can make a mistake. Thank you and sorry for my basic english. Macpatagon Hi, there are three tests modes on the multimeter you should be carefull with....
Chosen Solution No video but audio is ok. I used the flashlight test and I was able to see some dim letters and video. Then I opened the TV up and checked the power supply board– all the voltages work except the 24 volts one. What do I do in this case??? No blacklight btw. I checked using the multimeter the pins on the power supply linked to the main board....
Chosen Solution Just to add on, it does not say anything like “touch id fail” and I can change the “home button haptic to 1 2 or 3” but not feeling any shake when I press the button. " Samething, my finger prints are there but sensor don’t read my finger print(login screen won’t get in). It also does not have the “shake” feeling/ any response when I click on home button....
Chosen Solution I replaced my iPhone SE into a clear plastic custom housing shell that i bought online. For picture reference on what i’m even talking about, here is a photo. Everything on the phone functions perfectly, except for the NFC antenna. I didn’t notice this for many months because i rarely ever use apple pay. But i just decided to today and failed to get it working. Everything else on the flex cable works perfectly (volume rockers, mute switch, flash, power button, & vibrator), but nfc doesn’t seem to function at all....
Chosen Solution backstory on iPhone: I dropped my phone a few weeks back and the screen smashed and touch stopped working I was using another phone as a replacement and let the broken phone die when I tried to charge it to turn it on there was no sign of life not even red battery logo. I have just changed the screen and battery and the phone will not turn on....
Chosen Solution I have a 64gb iPhone XR model A1984 on iOS 13.4.1, and it says “There is a problem with your iPhone” “This iPhone cannot be activated for service. Please contact your carrier or AppleCare.” It has a good IMEI, not blacklisted or financed, and no iCloud lock. I have tried activating through 3uTools, multiple factory resets, and updated the iOS to its current version from 13.2.2. Doesn’t have a SIM card in it....
Chosen Solution Does anyone know if you can replace the Ir sensor on this particular model. Having a hard time finding out Hi, Is this the part that you require? Scroll down the page to see if your TV’s full model number is on the compatible TV list for this part or check the part number on the IR sensor board in your TV against the part number shown in the link....
Chosen Solution so i have this stains in almost every side of my phone back, i think its from the case i bought but i dont know and i wanna try to clean it with isopropyl alcohol 98% is it ok, my worry is would the paint rub off? Iso wipes or using the alcohol on a soft towel is OK to use. If you find that the wipes don’t clean it good enough dawn and water on a soft towel with very light rubbing will do it....
Chosen Solution I read that it would be hard to change the memory for the Kindle Fire (great forums you have here) but is there a spot where you could add a micro SD card? I have one (they are so small) with 4 GB of room, so that’d be a 80% increase ( 3 GB are already taken by pre-loaded stuff) of memory. (this is my first time here) -newbie...
Chosen Solution Hey. Someone has sent me an image of their broken screen on a 6s. They said the black marks are from water damage. Will a regular screen replacement fix this? Don’t want to say to them it will if it won’t. Pics (https://imgur.com/a/IjWmXi7) Thanks <3 Those marks are not from water damage, that is physical damage from cracking the screen. Anyway replacing the screen will fix the issue. Just a heads up, make sure to get full screen assembly (can be pre-assembled with front camera / speaker or not pre-assembled meaning parts will need to be transferred from old screen) and not a piece of glass....
Chosen Solution I thought it had something to do with signal, but it happens with my Audible app as well and those books are downloaded. It just randomly pauses whatever I’m listening to, even on Youtube. So far it’s happened on Pandora, Youtube, and Audible. What gives? Completely embarrassed to admit this but after calling Metro a couple of times and ranting on online forums trying to get help.. I had a bit of an A-HA!...
Chosen Solution Hi-I JUST replaced the battery to my iPod with iFixit, and it went smoothly. I connected the iPod (with the new battery) to my computer, and it is showing “Charging, please wait” and not disappearing. I’m starting to get anxious, because that’s what it was doing with my old battery, but would never ACTUALLY charge. Is this normal for new batteries and I’m fretting for nothing? Or did I replace a battery that was fine, and there’s actually something ELSE wrong with my iPod?...
Chosen Solution I have a Kenmore dryer that decided to stop during mid cycle. I checked the thermal fuse as this is a typical problem. Upon finding the thermal fuse it had been bypassed already, so I ruled that out. I also checked the door switch, start switch and all are working. It will work once it cools down, but then when it heats up, it’s stops during mid cycle. So, Then I thought it might be the motor, which was covered in lent, so I removed the tube, and vacuumed everything to include the lent tube....
Chosen Solution The last several iphone 6 and 6 plus and 6S plus screens ordered through different people for me to repair are ALL having the same problem. The new screens WILL NOT WORK! They either have horizontal, vertical or both lines on the display, the display flickers at the top of the screen or goes white. The touch works sometimes and doesnt work after a few hours at all. This is on several different phones, several different circumstances....
Chosen Solution My left high beam does not work on my 1996 Toyota Tacoma even with new lamp and relay. Solution? @hannibal316 check the socket and see if you have power coming to it when you turn your Hi-beams on. If you lamp is new and the relay is new you are most likely having an issue with the socket/wiring.
Chosen Solution I took apart the controller to see and put it back together to see if maybe the button was just loose but that didn’t seem to fix the issue. What would you suggest my next move be? I’m trying not to purchase a new one If your comfortable taking it apart again clean everything with isopropal alcohol. Sweat from your hands gets into the controller and gums up the functionality of the controller....
Chosen Solution Hi, My lenovo y50-70 charging port wires detached from mother board , I have to solder it again but there is no wiring connection indication on motherboard . Anyone can please share how to solder these wires on mother board ? which wire for which point? This may help: http://www.s-manuals.com/notebook/lenovo… Have you tried taking a high resolution photo of the motherboard or using a magnifying glass or loupe to look closely at the board....
Chosen Solution Honda fuel filter fix. @lo4143uis, Louis, No filter in 1998-2002 Accord in North America, the strainer/sock is in the fuel tank which is not normally replaced attached to the electric fuel pump. the image below shows it attached on the end of fuel pump(yellowy/gold color) Good luck. I hope this helped you out, if so let me know by pressing the helpful button. Hi @Mary Stone, Here a composite image from the Accord 1998-2002 CF8 CG3 CG5 CG6 with J30A USDM Factory Service Manual showing the location of the fuel filter....
Chosen Solution Hi, I am curious if there is a log within my phone that represents date and time of screen unlocks or if there is an app that can do so? Hi, Here is a link that may be of interest to you. https://play.google.com/store/apps/detai… Yes, it is called Carrier IQ, and it logs every activity on the phone. https://www.engadget.com/2011/12/01/carr…
Chosen Solution I’m troubleshooting for my parents’ iMac. Part # MC413LL Model# A1311 (last four digits of the serial #zb9u) It has all it’s original parts (although are unsure, the logic board might have been replaced while still under warranty), it has been into ’the shop’ a couple of times because of viruses and to have security software installed and/or updated. This time they took it in because ‘it wouldn’t boot and the picture was all funny’....
