Chosen Solution Repaired a water damaged phone about 2 months ago. Took out board and thoroughly cleaned with 50% alcohol. Screen was dim so replaced LCD Got phone working 100% Comes back this week with an irresponsive screen, display is fine but touch does not work. Any ideas, I’ve tried a different screen. I’m guessing Touch ic damage on board Likely. You should be used 90%, an ultrasonic bath would’ve been better....
Chosen Solution I have heard that it is bad to turn off your computers by holding the power button. I do it a lot because I don’t like having to go to the menu and shut it down every time. Is there a real drawback to me doing this? You do not want to shut down your computer by just holding down the power button. They have a shutdown option because there are many steps that Windows takes to shut down the computer....
Chosen Solution The top of my screen is noticeably dimmer now than in the past. “Easy,” I thought, “it’s the top backlight going out!” But now I’m not so sure. See, whenever the iMac wakes from sleep, the screen is nice and bright for about ¼ second before going back to its now-normal dim state. Can anyone tell me what’s going on? Is my backlight in fact going out, or is something else going wrong?...
Chosen Solution I have noticed that many devices get miscatagorized on this site. For example, there was the page for the Samsung Behold in the Android section, yet it doesn’t run Android, and a touchscreen MP3 player’s page (even though there is no phone functionality) in the basic phone section. Is there anything that members can do to ensure that devices get put into their right place? Yes! Report it here iFixit Meta
Chosen Solution Yah so I have a 6 plis that won’t go past battery charging screen, think it needs new battery but thats not the problem, the problem. Is that I spray ed99.9% isopropyl alcohol behind the display (metal sheet was off) and now the screen looks all messed up and water damaged. Is this possible? I tested the screen a little before spraying and didn’t have this problem, also I put a new screen on (black on white) and don’t have the problem, I assume it’s my fault but I thought 99....
Chosen Solution I would like to know the cubic feet size on my Kenmore 90 series model 110 #26901690. Thanks. The capacity for your washer would be 2.5 cubic feet for an “Extra Large” tub or 3.2 cubic feet for a “Super Capacity Plus” size.
Chosen Solution My laptop was working fine last night and I put it on my table before bed and when I woke up it didn’t want to turn on. I thought it was out of charge so I checked by holding down, no indicator. I thought the brightness might be too low, no result. I connected the charger and it charged. But it did not turn on. I clicked the caps lock no light tried turning on again no result....
Chosen Solution I’m interesting to replace LCD retina (included touch screen) on A1778 black iPhone 7; I bought iPhone in Italy where I live. I’d like to order parts in iFixit.com site because I need further parts which EU store doesn’t supply, so I asked Ifixit.com about part compatibility. Ifixit.com answered me cannot determine compatibility from here and I will have to research that on my own, but how can I verify it ?...
Chosen Solution Lg model number: LFXS32726s /02 i unplug for 12 hours and plug back and error show after an hour i replaced Harness Assembly EAD62885101 and error came back again replaced whole Assembly blue light and Evaporator Fan Motor and etc whole top part of back cover and error came back. I replaced LG Defrost Heater Assembly MEE62805103 and error came back after two hours. I am thinking to replace EBR78643414 Refrigerator Electronic Control Board ....
Chosen Solution Hi, I was trying to replace the lightning connector and I removed the old one from the phone. When I went to put the new one in and removed the blue paper from the adhesive on the flex board, all of the adhesive came off the flex board and stayed on the blue paper. How important is the adhesive to be attached to the flex board, so it’s in between the flex board and the hard back?...
Chosen Solution Hey. Im looking for a universal LCD and Digitizer tester. I can not find it anywhere. Can it be right that i need to buy each and every phone on the marked to test LCD and Digitizers after repair? Is there not a machine out there somewhere where you can change cables on, so you can test more then one phone? I found testers for iPhone 4 and 5, but im looking for a machine that can test all phones....
Chosen Solution My 2011 Late Version Macbook Pro gets to the loading screen at about 1/3 full and then stops. To be fair i brought it to Apple about 2 years ago and they said it was a logic board problem and I had to replace it. I got a newer mac but after finding ifixit I wanted to see if anybody had any idea on how I could save it....
Chosen Solution A couple of weeks ago I decided to finally replace my old HDD for a SDD and it was great. Computer was like new, a dream. A couple of nights ago, however, I decided to also replace the optical drive for my old HDD and it may have been one of the greatest mistakes I ever made. In the process I screwed up the camera cable (which is fine, since I almost don’t use it)....
Chosen Solution All right Fellows, I am just sharing my experience about this problem, although I found a lot of complains about it on the web, there may still be someone trying to figure it out what happened to their mac. All of the sudden my macbook pro didn’t turn on, being located in Brazil, and having to deal with an Apple authorized repair shop with horrible costumers reviews, I decided to open it up and try to have a clue of what was happening, and there it was, signs of humidity on the logic board....
Chosen Solution Has anyone tried the new Magic Mouse with linux? I’ve heard it works as a two-button mouse in linux, but I’m curious if anyone can confirm that scrolling or gestures are supported. I got one of these for Christmas, so I can confirm that it works on linux. It looks like someone is working on a linux driver, but it’s in the very early stages of development. They’re hosting it on github: http://github....
Chosen Solution Hello, I have a MacBook Pro 15 2008 unibody and when I plug the 85W MagSafe in (without the battery in ) the unit will not turn on, however it will charge the battery when the battery is in the computer! Also, when I tested the G3H circuit I am getting 24v! Any suggestions? I lot of machines won’t start with just the mag-safe plugged in. Put in a good battery and leave it charged up....
Chosen Solution Broke glass. Got replacement but broke display adapter during glass replacement process. Noticed Main App button wasn’t responding then. Bought new display adapt and installed successfully (Iphone works great) except that main app button still does not work. Button feels the same. Opened case and checked connections 1,2 and 3. Reconnected each. Also looked under button and black tape is there and does not appear to be damaged. Still have problem....
Chosen Solution i want to change my iphone 6 main machine how much are they sell Here’s the IFIXIT guide to replace the logic board: iPhone 6 Logic Board Replacement and here’s the link to the different boards IFIXIT offers: iPhone 6 Logic Board This is not something I would do if you haven’t done one before.
Chosen Solution Hello, Because my phone wasn’t charging, I had to replace the whole buttom part (including the mic). Afterwards the charging worked again and I did a full reset so I could sell it… However it turns out the the mic is not working propely as the one calling with my phone is very difficult to understand as if standing meters away from the phone. However WhatsApp calls und voice messages work without any problems....
Chosen Solution took a break from mowing now mower won’t start everything completely dead @unkhomer start with a new battery or a boost from a known good battery. Let us know what you get with that.
