Posts

Chosen Solution I have 2 identical 2006 Mac Pros. All went well when one day, upon boot-up, the monitor remained black. Thought possibly bad graphics card, so replaced it from the other. Still black screen. Same with RAM, and than re-set PRAM, and start with disconnecting peripherals. Still black. Spoke with Apple people, and told may be bad logic board. Before deciding which direction to go or take, is there anything else that can cause a black screen at startup?...

Chosen Solution Hi, My iphone didnt charge lately. I bought a new charger flex and before change it I checked it connecting the flex straight to the phone and the battery logo came up. Then I replaced the new flex and when i finished and tried to switch it on the apple logo or battery symbol didnt’t come up, no response at all. Which part could be wrong connected? I think i am going to re-install everything again but i dont have idea what could be the reason....

Chosen Solution Hello I have a iPhone 8 that is not water damaged nor has it had any kind of severe drops. The charger port doesn’t work but only wireless charging works. When put on the wireless charger it’s stuck in a boot loop. Does this mean the battery is bad or does it mean the charging port is bad? If I replace them will it work again? Thanks! Charging port probably - it would be my first guess....

Chosen Solution What is the cheapest way to fix this It’s very important to always disconnect the battery before disconnecting/reconnecting the screen assembly. The issue is that the LCD connector has pins that have high voltages (i.e. the backlight is ~20V) and ground in very close proximity. When you fumble around trying to line up the connector plug to the receptacle, you can short out the voltage rail and cause damage to the components in the backlight circuit....

Chosen Solution Please help!? I have a Nikon b500 & i was hoping to add a lens to my camera is it possible if so please let me know thank you No, this is not a removable lens camera. Nikon B500+ 2,2x Raynox teleconverter and 3x Sevenoak viewfinder. Its make 88x optical zoom. I can take full zoom pics with out tripod.

Chosen Solution one of those pins is missing. @kia_salemi that is part of your display assembly flex. I have not come across a replacement connector. the connector it plugs into is Samsung part number 3711-007617. It is a HEADER-BOARD TO BOARD connector Specification: ‘‘BOX,40P,2R,0.4MM,S You could try to do a search on that and then connect with a vendor to see if they have the mating connector for that. Otherwise you’ll have to replace the complete display assembly

Chosen Solution A couple of the pins inside the charging port broke off. It can be done. Not super easy. Here’s a video of a 30. Sorry, couldn’t find an 80. But here’s a hard drive guide for an 80. Should help you get closer https://m.youtube.com/watch?v=4CVFiBkIgG… https://m.youtube.com/watch?v=gmBnwyOJQP…

Chosen Solution I have parts left over iPhone repairs so front and back camera. How can i put theses to good use? an adapter..or setup mini raspberry to control and power up my cameras. There’’s got to be a way I have most cables except the logic boards. It just seems like a waist. Unfortunately, the camera is encrypted by the manufacturer, and needs a set of chips (specifically an iPhone’s GPU) for it to work....

Chosen Solution Hi guys I accidentally purchased the wrong part for my pixel 3aXL… I bought the pixel 3a volume flex ribbon cable instead of the 3aXL. However, the flex cables look very similar…the buttons are in the exact same placement as well as the circle cut pass-through alignment points…there is a slight difference in the cut outs on the sides… but I don’t think it should affect fitment. Does anyone know if these are interchangeable?...

Chosen Solution Is there a difference between all of the Shark Rocket HV300 series? Am I able to use the HV300 user manual or repair guides for my HV301? There are only a few slight differences in the HV300 series of vacuums. The HV300 is the lowest model, and has a 27 foot power cord while the HV301 and HV302 both come with 30 foot cords. Other than that, the differences are the number of accessories each one comes with....

Chosen Solution I’m looking to buy a microsoldering kit and I was wondering if this would be suitable https://store.ifixit.co.uk/products/stan… It is. What makes it ‘‘micro’’ is your own skills ;)

Chosen Solution Hi guys, I have a Haier LE40B8000 model tv but not sure if the prob I have is only the t-con or much more. Appreciate your inputs guys. @panterna neither nor. This is a broken LCD panel. There is no repair for it. You will have to replace the panel. This will be tricky since panels are not easily obtainable. Take the back cover off and check for the label on your panel....

Chosen Solution Hi, I’ve a MacBook Pro 5,5 with all of the necessary EFI and SMC updates. I have the same issue. I can format and install system on the shipped internal drive when it’s in an external enclosure and can boot etc. But once I put the drive into the internal slot and use the internal cable it just won’t boot. I’ve a 2nd drive from an older macbook which replicates – though for that one it will attempt to boot, but never gets passed apple emblem and grey rotating start-up....

Chosen Solution I recently wiped my partition to give this laptop to my dad after I received a mid 2012 MacBook Pro, I had been able to wipe my partition and install a given OS such as Sierra and High Sierra without issue and for some reason while trying to install El Cap it just won’t work. I’ve tried to put the correct date in terminal, sign into iCloud with the given account, attempted to use internet recovery mode (not supported on 2009 models but it was worth a shot)....

Chosen Solution On a1998 Honda Accord key symbol came then car stalled would not start right away after about 10 mins it cranked what could this be Sounds like it might be your anti theft system http://www.ehow.com/how_5978795_reset-an… Give that a shot. Vickie Green, Just resetting will not fix your issue. You should consider having your car diagnosed and repaired right away as this can be a big safety issue if in traffic if car stalls out again....

Chosen Solution In the messenger app my keyboard collapses on its own after about eight seconds. Can anyone help me with this solution to this problem? Hey mate!! This is my first ifixit answer so please help me improve…. I think you should reset the phone. To do that Firstly you need to backup everything (like your photos, videos, contacts and any tying of importance ) Then go settings and search for reset and select something that say “factory data reset” or “ reset data and settings” If the problem persits I think any note 20 ultra would be in it’s warranty period so just take it to samsung service center Do suggest ways in which I can improve… Cheers...

Chosen Solution More often then not the left mouse button double clicks. I have adjusted the sensitivity to the lowest possible setting and it’s made no difference. Probably the button needs to be cleaned. Could you tell me if it’s safe to take them apart like you would a key board and clean them? It’s a basic Logitech mouse with wheel in the center. I’m sorry I don’t know the model....

Chosen Solution I have friend that had the driver for the touchpad disappear. They are having all sorts of problems getting a new driver downloaded. Computer shop wants paid and said all data would be lost when they do it. They couldn’t just download the driver hi i fix this problem by make the last update of bios

Chosen Solution My mid-2011 Macbook Air 13" lost the ability to charge the battery. I replaced the IO board with replacement from iFixit (IF188-069). The power is now working perfectly, but the left speaker (the one plugged directly into the IO board) does not make any sound. I’ve tested the new headphone jack and both left and right channels work fine. I opened the case back up and disconnected and reseated the speaker connection, but I’m still getting no audio on that channel....

Chosen Solution What’s this part that is located under the trackpad, is it apart of the trackpad. The laptop i’m fixing is from a result of water damage, does anyone believe I will need to replace this part as well? This is the SSD and the SSD carrier. Here’s the IFIXIT guide on it: MacBook Pro 13" Retina Display Late 2012 SSD Replacement