Posts

Chosen Solution I had just replaced the timing belt and the water pump with pulleys, and put a new distributor in. The wire that goes to my security system was cut. Not sure if that would effect anything. I’m not sure if it’s the crank shaft sensor either. Maybe it’s off time. Sounds like that or mechanic got you bad I owned a 94 GT for a few years. A few weeks after buying her she started randomly stalling, running rough and loosing power....

Chosen Solution Recently I started a iPhone business and I started fixing a dodgy iPhone 6 Plus in which it’s touch didn’t work. So I opened up the phone and put the connectors back in place. It worked but I could still see the phone show white lines at the top every now and then when I put pressure on the back. Recently I opened up the phone again and now it showed just lines on the screen and no display....

Chosen Solution I just replaced my iphone 6’s screen and all was well, it was working fine and then i put the screen completely on and put the two bottom screws on and gave it a restart for good measure. upon it booting up it will either give me a red screen and crash and loop or show an infinite apple logo. sometimes it will show the red screen and then loop into the infinite logo....

Chosen Solution How do I solder two layers back together when the top layer is slightly bent at the top? Thanks in advance! If it is the front of the board that isn’t connecting I wouldn’t be too worried as they are all ground pads. If it is bent significantly you will need to solder the spacers back on and clamp it down while heating. I think there are about 8 spacers....

Chosen Solution So, pretty much as the title says. When I turn the phone on, it displays the apple logo, but sometimes it’ll turn pink, distort and it sometimes boots up to the start up menu… After a short while it might decide to become unresponsive and reboot the phone. It’s a constant loop. Has anyone came across this before and if so, how do you go around diagnosing the problem?...

Chosen Solution 8 GB: my ipod it dead it wont fire up at all and when plugged into computer it is recognized by the computer as a device. still wont turn on at all. when ipod software is opened it recongnizes that the device is there and that it is in recovery mode and wants us to restore it. but half way through restore it comes up with unknown error 1600 or 1601...

Chosen Solution I would like to buy the Mac mini server, but at the moment it cost a little bit too much for my possibilities. A part from the double hard disk what I like of the server one is the quad core i7 processor. Is it possible to put a new CPU on the motherboard later on my own? Thanks No, it is soldered down, but the previous Mac Minis before these style ones, you could

Chosen Solution when ever i turn on the computer, my airport detects my network and others. I connect to my network but as soon as it connects the bars quickly decrease jumping from five to two and the one. then there is no bars. it stays like that. i try searching again and again for any network even mine. it doesn’t detect. If I turn on & off the airport, then the whole scenario repeats....

Chosen Solution Well I turned off my phone to fix the selfie camera. before that everything was working fine. But I havent unplugged the battery when i take out my screen i just turn the phone off. After putting the phone back to on the screen stays black. the battery is brand new and the screen is a few months old and i dropped it a couple times my new screen comes tomorrow if it stays black anyone have any ideas what it may be and how to fix it?...

Chosen Solution I have an 8GB iPhone 4s (model confirmed by the tool on this site) and I need to change tś battery. In all guides and documentation I can find on the site I can choose between 16 and 32 GB. No 8GB choice is avaliable. Does it matter for what I need to buy, and for the process of changing the battery? tobiasaheiberg, no it does not. The battery is compatible with all models....

Chosen Solution I’ve tried all choices on your site. None worked, so I have no symptoms except that it would turn on for a while, it would get hot, then turn off. I’ve ignored it for a bit, leaving it unplugged and working on my other Mac. Now it won’t power up at all. I double checked the power cord, I plugged it in for a few hours and nothing. I tried pulling the battery out, nothing....

Chosen Solution Yesterday, my iPhone 6 suddenly showed a very bright spot on the LCD, and a dark stripe below it. Half a day later, the screen has bent forward, so much that there is now a gap between the back and the screen of about a millimeter wide, around the volume buttons. Any idea what this issue is? Is it worth trying to replace the screen? Looks like a swollen battery and a broken screen… open it and see if the battery is fatter than its supposed to be....

Chosen Solution Hi, I got this Mac Mini 2012, I did change the HDD with a new SSD, I started to install a new OS, half way something happened it’s stops and I had to restart because won’t install, than I was facing with infinite restart chime, you can see on the video, it shows nothing on display. https://www.youtube.com/watch?v=1P9nuKV0… Anyone can help me what to do? I did try a lot of things like reseting and stuff but non of that works… Help is appreciated....

Chosen Solution So im having this issue with my MacBook Air early 2014. It won´t turn on unless plugged in to the charger and after booting up, i can unplug the charger and it will work fine. already reset SMCRestore OS via USBTried new battery Issue persists. Any help will be thanked! That points to a logic board issue at charging/main power circuit. Usually that comes from a liquid damaged Mac or a poor quality aftermarket charger....

Chosen Solution I just finished doing some major computer repairs on a 2.0GHz MacBook Core Duo. About a week or two ago, my mother was using her MacBook while drinking coffee and ended up spilling a significant amount of it onto the top case of the open MacBook. She called me about it and I was able to obtain the MacBook that night to do some heavy duty cleaning. I took the computer apart entirely and cleaned up all the coffee I could using 91% isopropyl alcohol....

Chosen Solution Hi there, Ive worked for years on component level repair logic boards etc but this problem has me stumped, the machine switches on but then instantly acts as if the lid has been shut therefore going into sleep mode, the only way I can get the device to work is buy running it in clamshell mode then installing insomnia (if you haven’t heard its a program that can prevent your Mac sleeping with the lid closed)....

Chosen Solution Hello guys, I recently encountered a problem with my MacBook Pro Mid 2012. I used for a long period a SSD (Kingston SSDNow UV400 240 GB). I had no problems until some days ago when the system froze up suddenly. I only use the my system for Facebook, YouTube, watching movies, no hard use at all. I restarted the device, I opened the case to see if it’s the ribbon, but it looks clean and well fixed....

Chosen Solution My xl bravos power washer stops on the spin cycle and stays stuck on 14 for several minutes. Water drains out. It trys to spin but only moves a little. And then the sd code comes on before this happened i would get the ul code but could get it to work . This fix has done it for others that have had this problem: https://www.youtube.com/watch?v=RNOFc6do… The code name “SD” is telling you there is too much suds in the washer, therefore it cannot operate due to that....

Chosen Solution I want to upgrade my laptop’s current HD & RAM, possibly removing the Optical Drive as well since it doesn’t work anymore. Any Suggestions ? It’s not for super critical work such as Audio or Video Editing, I just need it to be faster, or as fast as it can get. Thanks in advance. To start with I would bump the RAM to 16GB which is the systems limit MacBook Pro 15" Unibody Mid 2012 RAM Replacement As for as drives I would go with a 1TB so you have plenty of space....

Chosen Solution The 4g on my ipad mini stopped working on my way home last night and i cant get it to start again. It was not dropped and didn’t get wet . only the 4g doesnt work when I set it to wifi at home that works fine . Any ideas Have you tried updating your carrier settings https://support.apple.com/en-ca/HT201270 hope this helps