Posts

Chosen Solution Quick question- is a XT1032/XT1036 LCD compatible with XT1028 phone? They are both moto g 1st gen so I don’t think it would be incompatible but just wanted to be sure. If you check on ebay most sellers group all three of these screens together so you probably would be safe to say they are this is just a sample there are others http://www.ebay.ca/itm/LCD-Display-Touch… By the way how did you make out with the iPhone 6s with water damage you bought of ebay ....

Chosen Solution Hello all, So I received an iP 6plus the other day. Client brought it in for screen issues to another shop. It was powering on before he brough it to them, and after it was dead. I spotted long screw damage - Excavated a bit but all the traces where I was expecting a break look good. What do you all think from these picture? Other than that - Looks like it had touch disease - Probably the screen issues he was having....

Chosen Solution The 3.5mm AUX socket is broken on my Jawbone Jambox, I’m hoping to replace it but can’t find where to buy the component? Has anyone else managed to change this port? Looks like that AUX port is on the micro USB board: Jawbone Big Jambox Micro USB Port Replacement Looking for how to replace a broken charging port for the Jambox. need help with that also I know this is late, but for anyone else who needed the part/component number for the 3....

Chosen Solution I just bought a used imac 21.5 emc 2389 Was told power supply was replaced but its still not working. (Have reciept and old power supply so i know it was replaced) So with some help from google i checked the led diagnostic lights and light 1 and 2 light up but 3 and 4 do not. I get no chimes, no beeps, screen does not light up or do anything....

Chosen Solution Hey guys, my keyboard on my Macbook air is just crazy. It only works fine by holding down the option key. Only “, enter and erase is working fine without option key. And not enough…by pressing the keyboard, whether or not it is working, the trackpad only makes a doubleclick altough I just pressed with one finger. Thanks for helping and sry for the grammatics. Update (04/05/2016) Update. Removed the Backlight with no problem and damage....

Chosen Solution Hello! I have bought an older but still powerful Macbook Pro 15- Laptop with 2.5 GHz and 512 MB VRAM! I am very happy with it but I really like the newer keyboard-style of the newer macbooks (pros) with black and non-clustered keys. So I would like to install such a newer unibody-keyboard into my ‘old’ Macbook Pro. Is this possible or will some keys not work properly? What problems are there, would be there?...

Chosen Solution Laptop not detecting USB. Tried to connect in all ports but still problem is same. Can anybody advise Follow this link to a previous question with helpful troubleshooting methods: Why are my USB ports not working? If that doesn’t work you can try these methods from an article on the Microsoft support page http://support.microsoft.com/kb/817900 firstly in the bottom left search bar type in device manager, go to the bottom option “universal serial bus controllers” select your items and try updating the drivers by right clicking on them...

Chosen Solution I have a Toshiba satellite L500 laptop with 16" screen, and my LCD screen cable is damaged. I was wondering if a 15.6" LCD data cable would be compatible with my laptop which is a 16" model. also does it have to be LCD cable for L500 model or can I replace my cable with a cable from another model of toshiba satellite laptop (e.g. A500 model instead of my L500 model)....

Chosen Solution When I switch the camera on, the lens gets jammed and does not fully extend. N Varaprasad this is a common issue with all digital cameras. Check on here for a possible solution. Those tricks work sometimes, but most of the times you do need to replace the complete lens assembly. Here is a video that will help you with that.

Chosen Solution I have a canon Power Shot that the lens will niether open all the way or close all the way. My 2 year old grand daughter was playing with it and now when I try to use it it says lens error, restart. i have tried that for a week. It isn’t working. Anybody have any ideas? Linda, this is a common thing and it happens quite frequently. Check this link for a few solutions....

Chosen Solution I’m about to replace the Logicboard on a A1416 since the device is ‘Find My iPhone’ (I believe iCloud?) locked when I got it. Is the Home Button, Touch ID, and FaceID (assuming it has the latter two) tied to the logicboard on this model? I can’t find anything on the topic. I guess I should’ve googled a bit more… https://en.wikipedia.org/wiki/Touch_ID This iPad 3rd Gen (released in 2012) is too old to have TouchID as it wasn’t released until a year later on the iPhone 5s for phones, and didn’t come to the iPads until 2014 with the iPad Air 2....

Chosen Solution I’m looking at replacing it and can not seem to locate the replacement part. Model A1502 . EMC 2678 Apple Part #: 923-0225 Here’s one: http://www.powerbookmedic.com/MacBook-Pr…

Chosen Solution Hi! Does anybody know the cause of lower memory slot failure (PowerBook g4 A1095)? One man said it because the north bridge burning and he can replace it with new one …. Any ideas? Thank you! I have found on some of these “bad slot machines” that a lesser RAM chip will work when the higher ones will not. I’ve been able to install 512 k chips in slots that no longer will take the 1 GB chips and its worked fine....

Chosen Solution There are 3 microphones in the V20. One of the 3 on my phone seems to be dead; the one used for calls located next to the headphone jack on the bottom of the phone. It seems to pick up a faint amount of audio, but so faint that it might as well be nothing at all. Anyone else have this problem? Easy to fix? Replacement part? Thanks in advance!...

Chosen Solution Got one earbud wire ripped out accidentally, but luckily the wire itself was still fine, just had to open the earbud and solder wires again. My earphones are Atomic Floyd super darts, high quality (as far as I can judge :-) ), so I could unscrew it to fix properly, or at least I tried. Sound is back, but the earbud I fixed has a lower volume than the other one (as well as decreased sound quality)....

Chosen Solution I followed this guide to replace the battery in my 11-inch, mid-2012 MacBook Air. All seemed to go well at first, but the battery connector has come loose twice now. The first time I opened the case back up and rearranged the cable before plugging it back in. This fix lasted less than 24 hours. Does anyone have any advice for me before I go in and try again?...

Chosen Solution Hello, My macbook fall about one feet directly on the bottom (realy flat fall) Since, it refuse to boot, when I try, the light on right bottom flashing and nothing… May you help me? (I’ve tried to remove ram and replace but nothing, I’ve looked inside if something was broken but nothing… When I switch off, I ca heard the hard drive is stopping, the screen is always black but not when i switch on, it light a micro second and still black Any ideas?...

Chosen Solution I recently replaced the battery for my Mid-2012 MBP using the iFixit battery replacement kit and instructions. Everything booted up without a hitch, worked great for about 2 hours, and then shut down randomly. I’ve been able to reboot using my magsafe charger, and then unplug and run off battery power. However, this only works for about 10 minutes before the computer acts as if the battery is suddenly disconnected and shuts down again....

Chosen Solution I have a macbook in use at 1 year, about 3 weeks until today the screen sometimes turns white and back to normal, did not find a cause of the problem, need your help to know what may have caused this problem and and what is a solution to this type of problem. To better understand you can see the link below: https://d.pr/qlicEC Hello, Does this only occur when you tilt and move the screen?...

Chosen Solution I am trying to troubleshoot my early 2011 MC723LL/A Won’t switch on, won’t charge and shows no led on charger. Replaced battery and charger but no change. I have removed logic board and photographed. I have no clue what to check or look for so any advice is appreciated. I can add any images needed What should I be looking for and testing? Thank you! Images here https://www.dropbox.com/sh/ri859ao391azt…...