Posts

Chosen Solution Water was spilt on my Macbook Pro. It now will not turn on and the Magsafe light just blinks over and over. What does that indicate? Thanks probably not so lucky with this one try different charger now need to open up the laptop wash the logic board and check for corrosion damage carefully examine power board for any signs of burning replace main fuses if nessecary and clean the megsafe connection if this still wount help you can try different power board and/or logic board Electronics Water Damage

Chosen Solution My microphone doesn’t work whit the speaker is active and neither work when I take a video but is work when I call what is my problem ? The top microphone located on the front camera assembly needs to either be replaced or cleaned. The speaker filter for the top microphone especially if it’s blocked. You can get the part from here: iPhone 6 Front Camera and Sensor Cable Guide to replace the part: iPhone 6 Front-Facing Camera and Sensor Cable Replacement Make sure the earpiece speaker gasket is not blocked by checking it through light....

Chosen Solution Good day, my iPhone X had a problem, where the bottom speaker stopped working and the WIFI was greyed out (Bluetooth was also looping) so I wanted to reball/ resolder the wifi chip when I separated the two boards. The resistor right next to the Audio Codec Chip fell off and now I lost it, I have a spare iPhone 7 board lying around, I wanted to ask what its resistance was maybe I could find one from my iPhone 7 board and solder it onto the Xs....

Chosen Solution I woke up to my phone stuck on the apple logo. Tried hard reset, and the phone did reset, but stuck on apple logo again. If I keep holding the volume down and sleep/wake buttons, and the phone is not connected to the computer, the screen will turn off after a few seconds following the reset. The apple logo will also turn off on its own after 5 minutes if its off the charger; it will stay permanently on (not boot loop) if it is on the charger/connected to computer....

Chosen Solution So, for several months, I was having touchscreen issues with my iPhone 6. I was going to tough it out because my contract/lease was almost up. Until my phone died suddenly. Here’s what happened: -irresponsive touch screen for several months. -one day battery dropped to 6% and died, so I plugged it in. -phone turned on for two minutes while plugged in, then shut off. -tried a combination of pushing the lock and home screen button, no avail....

Chosen Solution I dropped my iPhone In my tea..i got it out Almost immediately tryed to turn it on but it did nothing but vibrate slightly..it could have been dead b4 the fall?. I immediately googled it.. Pushed pwr and home, it stopped vibrating, then remembering the rice theory, ran to the kitchen… No rice..except flavored.. Oops. Anyhow I got the plain white rice soon after and I toggled between the rice and heat and air in a can....

Chosen Solution Is it possible to connect the super drive and play the dvd in the tv,I will be obliged to have the procedures.Thanks I pretty sure you can. Idk what the cable is called but I know you use the mini display port or thunderbolt if you have it. Nara, personally I would ask if either of these guys has actually done this on a Mac made prior to 2010....

Chosen Solution My wifi is not working well so i’m thinking about buying both of the cables. However,i’m not sure weather the left and right antenna are made of the same components There’s a left and right iPad Air Wi-Fi Left Antenna Replacement iPad Air Wi-Fi Right Antenna Replacement Yep. They’re different iPad Air, iPad 5, iPad 6, iPad 7 Left Wi-Fi and Bluetooth Antenna That’s weird. Can’t find right. You may have to call/email iFixit and get the product code, and search that....

Chosen Solution Is there an extra slot for SSD? For ASUs Vivo flip tp501uq Hi, Looking at the motherboard in a SSD replacement video for the laptop there doesn’t appear to be any extra SSD connection types there i.e. M.2 or sata. One option that you may want to think about if you want to have extra storage in the laptop, is to insert the largest capacity SD card that you want, into the card reader and leave it there permanently and configure it as a storage drive....

Chosen Solution When I go to plug it in to charge it it doesn’t work nothing happens no light or anything pops up Hi, Try the following checks to see if the problem is in the charger, the charger cable or the speaker. Connect the speaker with the charger USB cable to a USB port on a working PC/laptop. (the user guide shows that the charger cable, USB cable standard plug charger end, micro USB plug speaker end, can be unplugged from the charger)....

Chosen Solution Is it possible to program a new key fob for a 2006 chevy equinox by yourself without taking it to a dealer? Hi @gww61 , According to this link: “You will need to find a local automotive locksmith or a dealer to program this key”.

Chosen Solution hey y’all! i bought this on Ebay recently and while the listing did mention the dent/drop, it also claimed full functionality… as it stands now, the headphone jack is unusable bc headphone cables won’t fit into the port The seller does offer returns but I’d rather just try and fix it if possible, would it be worth it try and bend the metal back out of the way of the port?...

Chosen Solution My Lenovo S510P Touch shuts down whenever I move the screen backward (increase angle between screen and keyboard) but remains on if I don’t move the screen or when I move the screen forward. The computer can be powered on no matter what the angle between the screen and keyboard is, but once its on and booted up, I cannot move the screen backward or the power would be gone....

Chosen Solution I just replaced my back housing but now the LCD and digitizer won’t work! The phone is on because music plays from the headphones. Any ideas? Try cleaning connectors 1&2. Check the pins for any damage. Then if still no effect you could try taking board out for 20 minutes or so (seems to rest the board in some cases.. Had this happen with one of mine when LCD wouldn’t work) if that doesn’t work try restore in iTunes(backup first!...

Chosen Solution the left and right bumpers/triggers do not work, no how much i press them Mitchell, the first thing I would try to do, clean the triggers. After a few years, there might be a lot of grime and debris that accumulates on/in the trigger. You should get some isopropyl alcohol and a q-tips. Wet the q tip and clean the edges of the trigger well. Should this not work and you feel up to it, dismantle the GBA....

Chosen Solution what happen if we plugged 5.0v charger at the place of 3.5v in canon powershot sx100 is camera is only showing “lens error restart camera " and getting off.And lence is remained opened. Please help…! mak, it is possible that your lens is either stuck or that the power surge damaged the DC-DC board. There are 3fuses on the logic board (check image) check those for continuity first. FU601 and FU602 are UNHS206 and FU603 is a UNHS203....

Chosen Solution how do i get back into my ipad 2? Crud. I forget the, oh! Yeah! Apparently you can go to the apple site. Ask them to reset your password, and they’ll email you a new one. Or, you can go to an Apple Store and have them reset your password, which they’ll send it to your email

Chosen Solution My Macbook’s Logicboard recently died, because my wife plugged in external DVD-player with wrong power cable. Official Apple Service told me that LogicBoard is damaged and needs to be replaced. Instead I asked another company to repair the board. Unfortunately, they didn’t manage to repair and told me the replacement is necessary. And now Official Service also doesn’t replace the board for original price (800 EUR), because the board was modified during the reparation....

Chosen Solution So I’ve recently resurected a broken macbook, replaced new parts and it was fully working, although the hard drive had the old mac os x and bunch of files that weren’t mine, so I decided to delete it all via disk utility ant reinstall a new mac os from usb. I made a bootable usb through transmac but the computer won’t recognize it while booting while holding option button....

Chosen Solution My 2014 13" MacBook Air monitor is dying. I have a late 2010 model that is in perfect condition. I would like to put that monitor on the 2014. I know the resolution is lower but I’d rather have a working machine that is newer. Will the mounting points match and will the cables connect? No, the 2010 assembly will only fit up to the 2012. The 2013-2015 assemblies are all the same....