Chosen Solution I have had my iPhone 8 plus for 2 and a half years, and it has never been dropped harshly or water damaged. In the past few months, I have had to position the phone in a certain way and keep the phone still for it to charge, and it sometimes says that my accessory is not supported. My phone also says my battery is damaged and only at 80% of its original capacity....
Chosen Solution Hi there, I have an iPhone SE 1st generation which does nothing unless I plug it in and put it into dfu mode. Without doing this the phone appears dead. It comes up with the option to reset and I do so but the device gets stuck on waiting for iPhone and eventually error 4013 will appear. Any ideas? There is a problem with communications between the NAND to the CPU....
Chosen Solution Hello A friend recently gave me an iPod Touch 1st Generation 8GB If that matters I plug it into my charger and the screen comes to the apple a few seconds later it shuts off and the only way to get the apple back is to unplug it and plug it back in then again for no more than a few seconds it shuts down iTunes doesnt see it 3uTools doesnt see if hopefully someone else has had this issue and can help thanks...
Chosen Solution I hope to hold on to my iPhone 5s for a while, but the storage space is so limited I can’t go to the next OS - 12.4.1 without making drastic cuts to what I have stored. Is there a way to increase gigs of memory without buying a newer phone? Backup important image videos on Pc or Delete unwanted program.Remove app data too then you got storage.Yes,other hand memory upgrade is possible too if you got the inlarge capacity of NAND like 32,64....
Chosen Solution I have a brand new LG (2 weeks) and it turns on immediately after I shut it down. I have nothing else plugged to it other than the power cord and it just turns on by itself within seconds of me turning it off. It’s maddening. its not settings, like auto-on or anything like that. wcolon1981 since this is a new TV you really don’t want to try anything but calling the LG support number....
Chosen Solution I’ve been attempting to repair a broken key mechanism for a MacBook Pro 13" Retina (Late 2013, model A1502) which I’ve been given. When trying to reattach the mechanism to the keyboard I’ve noticed that two of the four retaining metal clips where the mechanism locates on the keyboard circuit board are broken. I’ve uploaded a photo (see here), if you look at the bottom of the area where the key is missing you’ll see that there are no clips....
Chosen Solution The Apple Store helped me last week, said my laptop should not have accepted the latest update and took several hours at the store, then I took it home to reinstall at home from my TimeMachine backup external drive. Now it’s crashed again! Apple tech chat says my machine is Obsolete and they can’t do anything to upgrade me. What about independent techs, are there components to upgrade so I can get away from my High Sierra, and download Big Sur?...
Chosen Solution I need to get another power supply. I can see it is 5 V DC 1 A, but is the centre pin positive? Also, what size DC jack does it require. Sue, center pin is positive and looks like the barrel is OD:5.5MM ID:2.1MM
Chosen Solution An Usual, day before yesterday morning, while I opened my 2.5 year old MBA 13’ A1466 (Early-2014) (Opened in the sense, I opened the lid. I usually don’t shut it down, ). It wasn’t turning on. In those 2.5 years, I never had a single problem, be it battery life or performance. My Mac’s condition: 98 cycles completed. Battery health 98-100% (istat menus’ reading)It’s always kept on charge and at 100 %....
Chosen Solution The copy DVD stopped playing, was irratic but when I fast forwarded it, it played like the original but with no sound/no music. Original DVD is a dance DVD. I noticed it took a long time (several minutes) to burn a copy of the original DVD. Help! Get a CD/DVD head cleaner and give that a try for both drives. You may need to burn a fresh disk, make sure the disk is dust & fingerprint free and try using the slower burn speed....
Chosen Solution I removed the hard drive from my old iMac (emc2638). Can I get the data from that hard drive and put it on this new iMac…? The old iMac no longer powers up… Yes you can, I suggest picking up a Hard drive to USB adapter for like $10 Connect the Adapter to the drive and the computerSimply move the files from the old drive to the new one
Chosen Solution I put my Iphone in the washer stop working properly I can’t restore with iTunes error message 2006. The proper way to treat a wet phone is to do the following: Open your phone and remove the logic board (follow this guide)Inspect the logic board, especially around the connectors and look for corrosion.Inspect both sides of the board. Unfortunately, most of the board is covered in shields. That’s usually where the damage is occurring....
Chosen Solution Hi all, I recently replaced the screen on an iphone 6 plus, and after the replacement the phone will not charge, my computer will not recognize its plugged in, and I can’t get it to turn on. It’s basically bricked. Any solutions to this problem? the iphone was sitting for weeks before the replacement, so I don’t believe it was on during the replacement, but I did forget to disconnect the battery during....
Chosen Solution iMac early 2013 edu have i3-3225 CPU on board with 55w thermal profile will core i7-3770s with 65w thermo profile works? Hi all and Dan, today I opened up my Early 2013 iMac 21.5”, because it is having some problems with the display (or graphics) not turning on. I wanted to check if the CPU is socketed because there are many different answers online. I can confirm that the CPU is socketed, just like any other socketed CPU....
Chosen Solution I have a Kenmore Elite He3 washer machine (circa ~2000?) that has stopped working now and is throwing the dreaded FH error code and i was hoping one of you could help me in diagnosing the problem? CHECKED LIST: checked the pump cleanout and made sure it was clearreplaced the pump motor about two months ago (F9 error), has worked properly since it was replaced (up till now naturally)checked and cleaned out the airtrap in the back, it was mostly clean except for a thin layer of dirtchecked the pressure switch (makes a clicking noise when I blow air through it)checked the pressure switch hose for any holes or clogschecked the inlet valves for any debris but they were cleanchecked the flowmeter, it was mostly clean except for a thin layer of dirt and spins freely when i blow air through itchecked for any sort of siphon problemchecked the drain hose for any clogging problems, it was mostly clean except for a thin layer of dirt NOTES: if i turn on the wash cycle, it will run for about 2-3min b/4 it errors out w an FH error codewater does fill up in the drum when i first start a cycleafter the FH error code is thrown, if i power off the machine and attempt to run another cycle w the old water still in the system the washer will pump out some of the water that is already in the system, making me believe the water pump i recently replaced is still working properly....
Chosen Solution My laptop is getting turn on but it’s showing blank screen and making some beep sound Connect the power adapter again, wait 30 seconds, and then turn on the system. If your laptop starts, turn it off again and reinstall the battery. If the laptop won’t turn on after you’ve reinstalled the battery, you likely have a faulty battery and need to replace it with a new one Regards, Will
Chosen Solution Is there suppose to be two parts to the ear speaker rubbers. There is one connected to the proximity sensor and front facing camera ribbon. The other part is connected to the clear tape. I also have a small piece of black rubber not sure where it came from . The front camera has a proximity sensor which has a transparent plastic gasket that sits on the proximity sensor....
Chosen Solution My camera lens just stopped retracting and wont power on.It beeps for 3 seconds and says Lens error,restart camera?Not sure how to restart camera??Any help would be great.Thanks there are many ways to get it work again (at least to try to) the best way is this: Turn off the camera. Place it on the back with the lens facing up and take a look at the spacing between the lens and the lens housing....
Chosen Solution For some reason, when I play a video in the browser, a orange border shows up around the video. I have all the accessibility options off so I don’t know why it is there. Does anybody know how to remove the orange border? I have a picture below. The orange border is near the corners. Turns out it’s the video player that the website I was using that was causing the problem....
Chosen Solution Have a photos being taken on a tour boat and want pictures to auto upload to cloud storage for printing prior to boat returning. Suggestions? AW130 Coolpix Hi, Don’t know if this will work. Install Nikon’s Wireless Mobile Utility app in your phone. Then use it to transfer pictures from the camera to the phone (ensure you have enough storage space). Here’s a link to show how to do this (p....
